Use and Care Manual

Step 3: Pair with Remotes/Wall Switches
KLI 310/311/312 Remote: Identified by
gear and pairing icon on bottom edge of wall
switch
a. Press the pairing button for one second
b. Press the center stop button for one second
c. Within three seconds of step b press the
down button for one second
d. Pairing is now complete
1 sec
max 3 sec
KLR
100
Remote:
a. If time is showing, press
any button to advance
b. From the main screen,
press “Menu”
c. Highlight “System
settings” and
press “Enter”
d. “Register product” should be highlighted,
press “Enter”
e. Automatic setup should begin and may
take up to two minutes
P1
P2
Menu Locate
House
No. 1
Window
P1
P2
MENU
Enter
Back
House settings
User settings
System settings
Programsettings
P1
P2
Enter Back
Registerproduct
Copy system
Security key
Configure
SYSTEM SETTINGS
Back
AUTO SET-UP
Back
INFORMATION
New products
registered
Back
AUTO SET-UP
Back
INFORMATION
New products
registered
KLI 110 Remote: Identified by “io” in lower
left corner of wall switch
a. Press the “R” button on back of wall
switch for one second
b. Press the center stop
button for one second
c. Within three seconds of
Step b, press the down
button for one second
d. Pairing is now complete
L R
1 sec
max 3 sec
KLR 200 Remote:
a. Tap the house icon twice
b. Tap the “+” icon
c. Tap “New product”
d. Tap “Add new products”
e. Tap the forward arrow
f. Auto-search will begin, this can take up to
two minutes
g. Once product is found, tap the forward
arrow
04 Troubleshooting
15