Manualshelf

Installation Guide

ManualsBrandsVELUX ManualsDoors & Windows30-1/2 in. x 30-1/2 in. Solar Powered Venting Curb-Mount Skylight w/ Laminated Low-E3 Glass, White Room Darkening Blind
12345678910
16 VELUX
®
VELUX
®
17
L R
L R
1 sec
1 sec
KLI 110
KLI 110
KLC 500
KLC 500
KLC 500
KLC 500
Set-up of KLI 110 to operate products connected to
control unit KLC 500
1
Disconnect control unit KLC 500 from power outlet and remove
cover. Temporarily disconnect product cables for products not to be
operated by this control keypad KLI 110.
2
Reconnect control unit KLC 500 to power outlet and press test but-
ton for 1 second.
Caution: Press test button for 10 seconds if you want to delete all
previous set-ups.
3
When one of the products runs briefly back and forth, press button R
on control keypad KLI 110 for 1 second.
Note: Steps 2-3 must be completed within 10 minutes.
4
Disconnect control unit KLC 500 from power outlet, reconnect all
disconnected cables and replace cover. Reconnect control unit
KLC 500 to power outlet.
Repeat steps 1-4 for each additional control keypad KLI 110.
The products can now be operated by KLI 110.
1
2
3
4