Installation Guide

8 VELUX
®
VELUX
®
9
b
a
+
+
KEY PRG
LED
+
+
L R
-
-
L R
L R
LED
Operation
Keys for operating the product
a
OPEN/UP or
CLOSE/DOWN
Short key pressure: Product will travel to maximum top or bottom
position.
Long key pressure: Product will travel only until the key is released.
Note: If several electrical products are connected to a control unit
KLC 500, only one of the products (random) can be operated in this way.
Stop key
b
Product stops.
Batteries
Insert batteries as shown.
Set-up
On the back, the control keypad is equipped with two buttons L and R
and a light-emitting diode LED to be used during set-up.
If your VELUX INTEGRA
®
product has not been set up with the control
keypad from factory, this must be done.
Do not fix the control keypad to the wall until set-up has been completed
and it has been verified that the products can be operated from the
proposed position.