User Manual

ManualsBrandsVencer ManualsAudio EquipmentBluetooth Mono Headset

Mono Bluetooth Headset

The Mono Bluetooth Headset is a Bluetooth device developed with the latest

bluetooth technology, which can connect to other bluetooth devices such as

mobile phone, desktop or notebook computer, PDA wirelessly.

Getting Started

1. Charging Battery

The Headset comes with a rechargeable battery included. The battery is not

fully charged when it is new.

Plug the adapter into an AC outlet. The red indicator on the headset will turn

on.

When the battery is full, the red indicator will turn off and Blue LED will turn

ON.

2. Headset buttons

- S1 Button: Power on/off, Answer calls, End Call, Pairing, Voice

Dial.

- S2 Button: Voulme Up.

- S3 Button: Volume Down.

Summary of content (4 pages)

PAGE 1
Mono Bluetooth Headset The Mono Bluetooth Headset is a Bluetooth device developed with the latest bluetooth technology, which can connect to other bluetooth devices such as mobile phone, desktop or notebook computer, PDA wirelessly. Getting Started 1. Charging Battery The Headset comes with a rechargeable battery included. The battery is not fully charged when it is new. Plug the adapter into an AC outlet. The red indicator on the headset will turn on.
PAGE 2
3. Turning the Headset On or Off - To turn the Headset on Press and hold the S1 button for 3 seconds, then the blue indicator of the Headset flashes. The Headset is now turned on. - To turn the Headset off Press and hold the S1 button for 3 seconds, then the Red indicator will flash, and then the Headset will turn off. z z 4. Pairing the Headset You are required to pair the Headset with your mobile phone before using the Headset. The Headset must be powered off before initiating the aring.
PAGE 3
Using the phone keys to make call Dial the number on the mobile phone as you normally do. Once the call has been set up, the sound will be transmitted to your Headset automatically. 6. Answering Calls and Ending Call When the Headset is powered on, and there is an incoming call, you will hear a ring tone. (1) When the Headset rings, press the S1 button to answer. (2) Adjust the Headset volume by press the S2 to increase the volume or S3 to decrease the volume.
PAGE 4
Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.