User Manual

1
3. Turning the Headset On or Off
- To turn the Headset on
Press and hold the S1 button for 3 seconds, then the blue indicator
of the Headset flashes. The Headset is now turned on.
- To turn the Headset off
Press and hold the S1 button for 3 seconds, then the Red indicator
will flash, and then the Headset will turn off.
4. Pairing the Headset
You are required to pair the Headset with your mobile phone before
using the Headset.
z The Headset must be powered off before initiating the aring. Hold and
keep pressing the S1 button for 6 seconds until the blue and the red
indicators are flashing alternatively. The headset is now ready for
pairing.
z Initiate pairing process on your Bluetooth mobile phone to pair
with the Headset. After search, you can find the device name
“BT-MiniHS3”
z When asked the Passkey by the mobile phone, enter 1234 and
confirm it. (Note:The 1234 is a Default pin-code pre-stored in the
Headset.)
When pairing is successful, the red indicator will turn off and the blue
indicator will flash.
Note:
(1) If the Headset is not in pairing mode, your mobile phone won't find
the Headset. Please set the Headset into pairing mode
before letting your mobile phone search for the Headset.
5. Making Calls
 Using voice dialing.
Press the S1, waiting for a beep, and say the name of the person you
want to call.
 Using Last Number Redial
Press the S2 an S3 together, then mobile phone will dial out the last
number dialed.