User Manual

2
 Using the phone keys to make call
Dial the number on the mobile phone as you normally do. Once the
call has been set up, the sound will be transmitted to your Headset
automatically.
6. Answering Calls and Ending Call
When the Headset is powered on, and there is an incoming call, you
will hear a ring tone.
(1) When the Headset rings, press the S1 button to answer.
(2) Adjust the Headset volume by press the S2 to increase the volume
or S3 to decrease the volume.
(3) End calls by pressing S1 or don’t press any button.
7. Mute
Press both S2 and S3 keys in the same time to enable Mute function, To
press both S2 and S3 in the ssame time again to disable Mute function.
8. Transfer Audio
If you want to transfer the audio from headset to phone, press S1 and
S2 together.
9. Reject Call
When the headset ring and you do not want to anwer this call. To press
S2 and S3 together to reject this call.
10. Three Way Call
(1) To press S1 to be able to accept waiting call and hold the active
call.
(2) To press S2 and S3 together to be able to accept waiting call
and end the active call
(3) To press both S1 and S2 together to add the on hold call to three way call.
Low Battery
When the red indicator starts to flash, it indicates that the Headset is running
low on battery.
Charge the Headset until the red indicator turns off.