FCC ID: VHVBTVM1000 Bluetooth Mouse VM-1000 Button Function : 20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C. Tel. No.:+886-2-2698-3608 Fax No.:+886-2-2698-3648 Apr.07”2008 1/4 V1.
FCC ID: VHVBTVM1000 Bluetooth Mouse VM-1000 20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C. Tel. No.:+886-2-2698-3608 Fax No.:+886-2-2698-3648 Apr.07”2008 2/4 V1.
FCC ID: VHVBTVM1000 Bluetooth Mouse VM-1000 Quick Start 1. Power On/Off Sliding power switch at bottom of mouse to turn on/off VM-1000. 2. Pairing Press Connect button, and then Blue LED light on at sensor hole. Now, VM-1000 is under pairing mode. Step 1. Set VM-1000 under pairing mode Step 2. Follow the pairing process of PC to search & pair with VM-1000 Step 3. After pairing is complete, VM-1000 will connect automatically. When VM-1000 is connected, Blue LED will off. 3.
FCC ID: VHVBTVM1000 Bluetooth Mouse VM-1000 6. LED indicator There are 5pcs of LED to indicate the battery capacity when power on. The 5pcs of LED will scrolling when charging. The 5pcs of LED will show different length to indicate the CPI you selected when press CPI select button 7. Low Battery If the LED indicator only light on 1pc LED, it means low battery. Please plug charging cable/adaptor to charge battery. 8. Charge Battery The 5pcs of LED will scrolling when battery is charging.
FCC ID: VHVBTVM1000 FCC Compliance and Advisory Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules.