User's Manual

ManualsBrandsVencer ManualsAudio EquipmentBLUETOOTH STEREO HEADSET

Bluetooth Stereo Headset

The Bluetooth Stereo Headset is a Bluetooth device developed with the latest

bluetooth technology, which can connect to other bluetooth devices such as

mobile phone, desktop or notebook computer, PDA which supported HSP or

HFP( for voice) or A2DP(for music) profile.

Package Content and Picture

- Bluetooth Headset

- AC Adapter or USB cable

- Earpiece

- Quick Guide

Summary of content (5 pages)

PAGE 1
Bluetooth Stereo Headset The Bluetooth Stereo Headset is a Bluetooth device developed with the latest bluetooth technology, which can connect to other bluetooth devices such as mobile phone, desktop or notebook computer, PDA which supported HSP or HFP( for voice) or A2DP(for music) profile.
PAGE 2
Getting Started 1. Charging Battery The Headset comes with a rechargeable battery included. The battery is not fully charged when it is new. For first time use, it takes 3 hours to fully charge the battery. Afterwards, it will take about 2.5 hours to fully charge the battery. Plug the adapter into an AC outlet. The RED indicator on the headset will light on.(If the headset is power ON state, the RED LED will flash alternative with BLUE LED) When the battery is full, the RED indicator will turn off. 2.
PAGE 3
Step 2 : Initiate pairing process on your Bluetooth mobile phone/Audio Device/PC/PDA to pair with the Headset. After search, you can find the device name “VS-1000” Step 3 : When asked the Passkey by the mobile phone, enter 1234 and confirm it. (Note: The 1234 is a Default pin-code pre-stored in the Headset.) When pairing is successful, the red indicator will turn off and the blue indicator will flash. Note: (1) If the Headset is not in pairing mode, your Bluetooth Device won't find the Headset.
PAGE 4
5. Making Calls Using the phone keys to make call Dial the number on the mobile phone as you normally do. Once the call has been set up, the sound will be transmitted to your Headset automatically. 6. Answering Calls and Ending Call When the Headset is powered on, and there is an incoming call, you will hear a ring tone. (1) When the Headset rings, press the Answer button to answer. (2) Adjust the Headset volume by press the Volume Up and Volume Down button.
PAGE 5
RF Emissions Information CE This device has bee tested and found to comply with the requirements set up in the council directive on the approximation of the law of member states relating to EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC and R&TTE Directive 99/5/EC. FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.