Specifications

RDNO ATHLETIC PARK
AMENITIES BUILDINGS
WE File No.029042.00
May 30, 2014
4 | P a g e
1 GENERAL
1.1 It is the intention of these specifications and drawings to provide for a complete and fully
operating mechanical system as described herein, and in complete accord with applicable
codes and ordinances. The work to be done shall include the provision of all labour,
materials, tools and equipment as well as the application of a competent knowledge of
construction, required for the installation, testing and commissioning of the complete
mechanical system.
1.2 The drawings and specifications are a guide to establishing quality of equipment, materials,
workmanship and performance. Drawings and specifications are complementary to one
another. The term "provide" shall mean to supply and install.
1.3 References to “Consultant” in this document shall mean Williams Engineering Inc.
1.4 Any discrepancies between drawings and specifications leaving in doubt the true intent of
work shall be brought to the attention of the Consultant immediately.
1.5 Before submitting his tender, the Contractor shall examine the site and all existing
conditions affecting the work under this contract. He shall investigate and satisfy himself
that he can supply and install this work without any additional charges after award of the
Contract.
1.6 The mechanical system shall comply with the requirements of the local municipal building
by-laws, the current edition of the British Columbia Building Code, British Columbia
Plumbing Code, British Columbia Fire Code and all revisions and amendments thereto.
The Contractor shall pay all fees, obtain all permits required, and obtain inspections and
approvals from the inspection authority.
1.7 Furnish a written guarantee stating that all equipment supplied and all work executed
under this contract will be free from defects of materials and workmanship for a period of
one (1) year from the date of acceptance of the completed contract, and further that any
defective materials that become evident during the guarantee period will be corrected at no
additional cost to the Owner.
1.8 Employ only tradesmen having valid provincial trade certificates related to their work. All
work shall be executed in a workmanlike manner and shall present a neat and finished
appearance when completed. Workmanship shall be in accordance with recognized trade
standards.
1.9 All materials used shall be new and the best of its respective kind. All equipment installed
shall be in accordance with the manufacturer's printed installation directions.
1.10 The Contractor shall familiarize himself with the building plans and shall cooperate with the
Owner so that the work will not conflict with operations. Any conflicts or defaults which
arise during the construction period must be resolved immediately.
1.11 Without additional charge or expense, make any necessary changes or additions to
accommodate the structural, electrical and architectural conditions that are required for the
completion of the work.
1.12 Insurance coverage shall be provided by the Contractor unless otherwise indicated.
1.13 Leave systems operating with work areas clean and to the satisfaction of the Consultant.
1.14 All demolished materials and equipment are the property of the contractor and shall be
removed from the site, unless otherwise directed by the Owner.
1.15 Patch and make good any materials and equipment.
2 DESCRIPTION OF WORK
2.1 Be responsible for all work identified or implied by the drawings and specifications,
including but not limited to;
.1 Installation and commissioning of all systems, including the equipment provided by
the Owner where noted.