Specifications
RDNO ATHLETIC PARK
AMENITIES BUILDINGS
WE File No.029042.00
May 30, 2014
26 | P a g e
37.7 Lavatory ‘LAV-2’:
.1 American Standard Cadet #0236.004 Basin, 622 mm x 508 mm x (24-1/2" x 20" x
8") deep, vitreous china, for carrier with "U" bracket, rear overflow, faucet ledge,
generous shelf area. Sloan Optima #ETF-600-LT Electronic Faucet, chrome
plated, 4" (102mm) centerset, cast brass, 1.9 LPM (0.5 GPM) aerator spray outlet,
infrared sensor with screw adjustable range, undercounter filtered solenoid valve
with serviceable strainer filter, module control assembly with splashproof junction
box and mounting kit, 24VAC 50/60Hz, vandal proof box. Provide tee, adaptors
and flex. copper tubing to suit installation. 15 VA power required per unit. Sloan
#EL-154, box mount hard wired transformer, 120 VA / 24 VA 50 A. Lawler
#TMM-1070, Point Of Use Mechanical Water Mixing Valve, bronze body,
temperature adjusting dial, 10 mm (3/8") inlets and outlet compression fittings, high
temperature thermostatic limit stop (automatic shuts down flow of water when
temperature reaches 48 deg.C (118 deg.F) with automatic reset, shut-off with
automatic reset when temperature exceeds 120F (48.8C), integral checks, offer
temperature range from full cold through 46 °C (114.8 °F). Provide tee, adaptors
and flex. copper tubing to suit installation. McGuire #155AC Open Grid Drain,
chrome plated cast brass one piece top, 17 GA. (1.5mm) tubular 32 mm (1-1/4")
tailpiece. McGuire #LFH170BV, Faucet Supplies, chrome plated polished brass,
commercial duty 1/4 turn ball valve angle stops, 13 mm (1/2") I.D. Inlet x 127 mm
(5") horizontal extension tubes, combination V.P. Loose key handle, escutcheons
and flexible copper riser. McGuire #8872C P-Trap, heavy cast brass adjustable
body, with slip nut, 32 mm (1-1/4") size, shallow wall flange and seamless tubular
wall bend. Watts #CA-421, Fixture Carrier, steel hanger plate, heavy gauge epoxy
coated steel uprights with welded feet. For one unit: 102 mm (4") for two to six units
in a row: 152 mm (6") finished metal stud wall to back of pipe space.
37.8 Mop Sink ‘MS-1’:
.1 American Standard #7692.000 service / Mop sink, 457 mm (18") x 559 mm (22")
x 515 mm (20-1/4") deep, Wall Hung, faucet on wall, enamelled cast iron
construction porcelain finish, 229 mm (9") high plain backsplash, stainless steel rim
guard, wall hanger. Chicago Faucets #897-369VP-XK wall mounted Two Handle
Manual Faucet, chrome plated, 8" (203mm) centerset, solid brass exposed body,
ceramic 1/4 turn cartridges, unrestricted hose end outlet, 200 mm (7-7/8") from wall
to outlet reach, integral atmospheric vacuum breaker, metal red and blue index
buttons 60 mm (2-3/8") long lever handles with vandal resistant screw. Wall brace
support. American Standard #7798.030 Pedestal P-Trap with adjustable foot,
cast iron with metallic open grid strainer, 76 mm (3") outlet, flange and nipple by
other and F.N.P.T. Connection.
37.9 Mop Sink ‘MS-2’:
.1 Stern Williams #EB-54 square service / Mop sink, 610 mm (24") x 610 mm (24")
x 152 mm (6") deep, Floor Mounted, terrazzo composed of pearl gray marble chips
and Portland cement ground smooth, sealed to resist stain, cast brass drain with
stainless steel strainer, 3"(75mm) outlet. Chicago Faucets #897-369VP-XK wall
mounted Two Handle Manual Faucet, chrome plated, 8" (203mm) centerset, solid
brass exposed body, ceramic 1/4 turn cartridges, unrestricted hose end outlet, 200
mm (7-7/8") from wall to outlet reach, integral atmospheric vacuum breaker, metal
red and blue index buttons 60 mm (2-3/8") long lever handles with vandal resistant
screw. Wall brace support. Stern Williams T-35 Hose and Wall Hook hose 36"
(914mm) long with 3/4" (19mm) chrome coupling, stainless steel wall bracket. Stern
Williams T-40 Mop Hanger stainless steel #4 finish, 24" (610mm) long with 3
rubber spring loaded clips. Stern Williams BP Back Splash Panel 20 gauge type
304 stainless steel. Provide P-Trap, same material as the connecting pipe drain.