Specifications

Installing FireWire on a Mac 25
VeniceF
Operator Manual
Installing FireWire on a Mac
It is strongly recommended that when connecting or disconnecting the Venice F to a
PC/MAC/LAPTOP you do so in the following manner:
When Connecting the Venice F
• Ensure that the computer is turned OFF
• Ensure that the Venice F is turned OFF
• Connect your Venice F FireWire port to your computer’s FireWire port
• Turn ON your Venice F
• Turn ON your Computer
• Turn ON your Monitor Speakers
When disconnecting the Venice F
• Shut down record software
• Turn OFF your monitor speakers
• Turn OFF your Venice F
• Disconnect your Venice F
This section shows how to install and set up FireWire on a Mac. This procedure
comprises the following main steps:
• “Step A — Installing the device driver on your Mac”
• “Step B — Connecting the VeniceF to your Mac”
• “Step C — Configuring the FireWire settings for the VeniceF”
Step A — Installing the device driver on your Mac
Do not connect the FireWire cable to the Mac before installing the device
driver.
Important:
Before installing the FireWire device driver
, we recommend that you make
sure it is the latest version by checking the www.midasconsoles.com
website. This is important, as you may not be able to use FireWire properly
with an older version of the device driver.
>> To install the FireWire device driver
1
The FireWire device driver software can be found on the MIDAS website.