Specifications

FireWire 35
VeniceF
Operator Manual
FireWire
This section lets you select the channel input source as mic/line (analogue) or FireWire
(digital) and select the FireWire output signal as pre-EQ or post-EQ. For more
information on FireWire, see Chapter 3 "Using The VeniceF With FireWire" on page 17.
FireWire section of the mono input channels
Insert
This insert switch enables the channel’s analogue insert point, by connecting the insert
return to the channel signal path. This lets you use traditional compressor, gates or
other dynamic and signal processors or effects with the console. The yellow LED
illuminates to show when the insert is enabled.
Insert section of the mono input channels
Item Description
1 input switch and green LED The green FireWire input switch breaks the
mic and line signals, making the channel input FireWire only and,
effectively, creating a FireWire insert point (when combined with the
FireWire direct output). The green LED illuminates to show when the switch
is on.
Important:
To avoid a feedback loop, take care not to switch FireWire sends to
post-EQ when using FireWire inputs as digital insert returns.
2 firewire & direct out switch Switches the signal, which is routed to the
FireWire output and direct out, to pre-EQ (button out) or post-EQ (button
in).
1
2