Technical data

INSTALLATION INSTRUCTIONS

INSTALLATION NOTES

1. Cut the aperture to the dimensions shown below or use the template if printed on the

packaging.

2. Invert the Hob and apply the sealing agent provided to match the outer perimeter edge.

3. If the sealing agent is a strip type, the protective covering must be removed from both sides.

Do not leave a gap in the sealing agent or overlap the thickness.

NOTE:

do not use any Silicone based sealant, as this can damage the worktop surface if

repairs are required.

4. Insert the appliance into the aperture and fix in position via the clamps & screws, tightening

the screws evenly (see Fig. 1 below).

Fig. 1

VE0260011.2

595 510 560 480 33

V4GC6

595 510 560 480 33

VECG6003

595 510 560 480 33

V3G1WC6

595 510 560 480 33

VECG6004

595 510 560 480 33

VECG6006

595 510 560 480 33

VECG6007

595 510 560 480 33

VECG7001

685 510 560 480 33

VECG9002

860 510 830 480 33

HOB APERTURE DIMENSIONS