User manual

17
o Each press of the preset button (3) will increase the delay time
by 1 hour. The number of hours displayed indicates when the
wash cycle will come to an end.
o The washing machine will begin the program automatically, at an
appropriate time to ensure that the wash program is complete
by the time you have set. For example, if you program a delay
time of 3 hours, this means that the wash program will be
finished in 3 hours.
o You can set a delay time from 2 to 24 hours.
Safety lock
In order to prevent any inadvertent operation of the control panel, you
can set a safety lock to deactivate all of the buttons.
o After the wash program has started, press the preset button (3)
and the wash temperature button (5) simultaneously for about 2
seconds. The machine will then beep to indicate that it has
entered the safety lock state.
o All the buttons will be deactivated and the display will show “CL”
with a safety lock icon and the remaining or preset time
alternatively.
o To release the safety lock, press the preset button (3) and the
wash temperature button (5) simultaneously for about 2
seconds again. The machine will beep again to indicate the
safety lock has been deactivated.
Imbalance control
o If the laundry load is unbalanced when the washing machine
begins to spin, the cycle will stop while more water is added to
redistribute the load. This process may be repeated until the load
is sufficiently balanced for the spin to continue.
o If there is excessive vibration during the spin part of the
program, you should open the lid and wait until the drum stops
moving. You should then redistribute the load evenly in the
machine.
o When the lid is closed, the spin part of the cycle will restart
automatically in a few seconds.