User manual

3. INSTALL THE UNIT

3.1 LOCATING AND MOUNTING THE UNIT

Choose an appropriate location for the unit, far from the areas of the house

where peace and quiet are desired.

• So as to provide easy access for filter maintenance (sometimes, by

installing the unit upside down, it becomes easier to get to the filter).

• Close to an exterior wall, so as to limit the length of the insulated flexible

ducts to and from the unit.

• Away from hot chimneys and other fire hazards.

• Allow for a power source (standard 3-prong grounding outlet).

VD0156

3.2 TOOLS AND MATERIALS

• Phillips or Robertson no. 2 screwdriver

• Scissors or utility knife (to cut duct tape and flexible ducts)

• Duct tape

• Jig saw

• A pair of metal shears (if the exterior covering of the house is aluminum

or vinyl)

• A chisel and hammer (if the exterior covering of the house is brick)

• Caulking gun and caulking

3.3 HOW TO HANG THE UNIT

Use the 4 chains and springs in the hardware pack provided with the unit.

According to your needs, the unit can be installed upside down.

CAUTION

Make sure the unit is level.