User manual

19
3.2.3 Put the components back in place (cf: Section 1.1):
• Fan assembly (screws, damper rod, fan motor wires)
• Recovery module
• Filters
• Door
3.2.4 Reconnect the power supply.
3.2.2 Clean the centrifugal fan wheels
3.2 ANNUAL MAINTENANCE (FALL) (COND’T)
B
Disconnect the rod activating the square
damper.
C
Remove the two screws securing the fan
assembly.
D
Pull the fan assembly out of the unit
E
Check for any dust accumulation on the
blades.
F
Clean with a small brush if necessary.
VO0050
VD0139
C
D
B
CAUTION
Do not oil the motor! It is already permanently
lubricated.
A
Disconnect the fan motor wires.
VD0106
VE0050