User manual

1. Set the wall control to 80%.

(FAE115M, uFAE115M and

vFAE115M only)

2. Unlatch the door. Lift the panel

towards you. Hold it firmly and hit on

the right side of the pannel. The door

should slide to the left.

3. Clean the

filter

• Remove filter.

• Vacuum to remove most of the dust.

• Wash with a mixture of warm water and mild soap. You may add bleach if you

wish to disinfect

(one tablespoon per gallon or per 4 liters).

Rinse thoroughly.

Shake filter to remove excess water and let dry.

NOTE: Washing the filter in the top tray of the dishwasher is possible, but the

aluminum frame might tarnish.

4. Remove and clean the

heat recovery core.

• Let it soak in a mixture of cold or

lukewarm water and mild soap

(dishwashing liquid).

• Rinse thoroughly.

• Shake the core to remove excess

water and let it dry.

5. Clean the

condensation tray

with a damp

cloth.

NOTE: Unit shown is in reverse position but the unit can be installed in either

the “normal” or “reverse” (upside down) position.

MAINTENANCE PROCEDURE:

8.1 EVERY THREE MONTHS

Regular maintenance should be performed every 3 months.

8.0 M

AINTENANCE

VO0007

WARNING

We take great care to keep sharp edges to a minimum, but please be

careful when handling components.

CAUTION

Handle the heat recovery core with care.

VD0035

VO0009