Submittal Sheet

Venstar Flat Stat 1-Day Programmable
T1000FS
STANDARD FEATURES:
• Low profile design fits flat to wall for attractive, unobtrusive look.
• Mounting bracket included for easy drywall installation.
• Large, easy to read display.
• Auto Changeover, 2-Stage Heat/Cool for use with gas/electrics, heat pumps, electric & hydronic heat.
• Dual-Setpoint with adjustable deadband, setpoint adjustment range from 35° to 99° F, switchable to °C.
• Configurable Programming - can be made programmable (single day) or non-programmable.
• Configurable Display - set up as dual setpoint or single setpoint for ultra-simple operation.
• Thermostat Locking - Set points can be adjusted only by authorized individuals if this feature is turned on.
• Thermoglow Continuously Lit Electro-luminous Display.
• Display shows both heating and cooling setpoints and room temperature simultaneously.
• Maintains temperature to within 1° of setpoint.
• Adjustable deadband - can be adjusted 1 to 6 degrees.
• Temperature sensor calibration.
• All programming and setpoints stored in non-volatile memory, and are never lost in power failure.
• Sleek styling and white color blend beautifully into any decor.
• Red/Green LED shows whether thermostat is calling for Heating or Cooling.
• 5 minute compressor time guard and adjustable cycle limit, both overrideable for servicing equipment.
MODEL: T1000FS QUANTITY: DATE:
JOB NAME:
LOCATION:
BUYER: BUYER P.O.#:
ENGINEER: