Owner`s manual

ENTER EMERGENCY HEAT: Only available if you have a Heat Pump

installed. To initiate the Emergency Heat feature, press the FAN

button. While holding the FAN button press the UP button. The

Cool setpoint display will read ‘EH’ (emergency heat).

Press for

Emergency Heat

FAN

HEAT

Page 11.4

OPERATION: During Emergency Heat operation the

thermostat will turn on the fan and the 2nd stage of heat

when there is a demand for heat. Also during Emergency

Heat the 1st stage of heating or cooling will be unavailable.

EXIT EMERGENCY HEAT: Follow the same steps as entering

Emergency Heat by pressing the FAN and UP buttons. During

Emergency Heat, only OFF and HEAT modes are available by

pressing the MODE button.

Using Emergency Heat