Owner`s manual

Page 4.6
4
Press
MODE
Press
MODE
Press
MODE
Press
MODE
PROGRAMMABLE WITH MANUAL CHANGEOVER - If the thermostat is
configured to be a programmable thermostat with Manual Changeover, the
following screens will be available by pressing the MODE button.
The HEAT setting indicates the
temperature the room has to
reach before the furnace will
turn on to heat the room.
Heating Only
The COOL setting indicates the
temperature the room has to
reach before the air conditioner
will turn on to cool the room.
Cooling Only
OFF indicates both heating
and air conditioning
systems are turned off.
Off
Operating Mode when the Thermostat
is Configured to be:
Select the Mode by Pressing the MODE Button
Su
70
12:00
HEAT
68
Su
70
12:00
COOL
76
Su
Program On
70
12:00
HEAT
68
Su
Program On
70
12:00
COOL
76
Pm
Pm
Pm
Pm
Pm
OFF
Su
70
12:00
occupied
occupied
The HEAT Program On setting
will activate the time period
program for the heating
setpoint ONLY (occupied or
unoccupied periods).
The COOL Program On setting
will activate the time period
program for the cooling
setpoint ONLY (occupied or
unoccupied periods).
Time Schedule
for Heating
Time Schedule
for Cooling