Quick Start Guide

12
Step 9 - AttachThermostat
1) Alignthepinsonthethermostatcircuitboardwiththecorresponding
holes below the wiring connectors and push the top and the bottom
of the plastic housing enclosing the display until it clicks into place,
top and bottom.
Step 10 - SwitchPower/CircuitBreakersBackOn
Turn your furnace and air conditioner breakers back on at your breaker
panel.
Side View
Displayshouldclickinto
place easily. If you encounter
resistancedonotapplyexcess
force–taketheplateo,
check that the pins are straight
and ensure there are no wires
in the way and retry.