Product Specifications

KHSLD LINER Halogen lights only. This model not available with heat lamps. This model only available
in Black, Biscuit, Gunsmoke Gray, Stainless Steel, or White.
WALL MOUNT LINER INSERT SPECIFICATIONS
Top Vent or Back Vent
3 ¼” x 10”
The VP521 transition is available
for top vent applications
at an additional charge.













Wall Cutout for Horizontal Ducting
Viewed from Front
To p of Liner
5"
5 1⁄8" 7"
C
L
*Exceeding recommended
mounting height may
compromise performance.
U
L
CUS
R
7”
7 ½”
3 ¼”
10”
Connection Diagrams (28 3/8", 34 3/8", & 40 3/8" Widths) Recommended
Mounting Height*
KHSLD
Electrical/Mechanical Specications For Blower Units
Model Volts Amps Hz RPM
CFM
SP@0.0"
Equivalent CFM
•
CFM
SP@0.1"
CFM
SP@0.2"
CFM
SP@0.3"
Minimum Round
Duct Size
Sones
#
K250 (Top Vent) 115 3.2 60 1550 250 375 223 220 190 7" (38 in.
2
) 7.4
K250 (Back Vent) 115 3.2 60 1550 220 330 215 195 180 7" (38 in.
2
) 7.4
All K-Series hoods have two halogen lights.
• BecausetheMagicLung
®
blowerusescentrifugalltrationratherthanconventionalbafeormeshlters,theMagicLung
®
blowercanhandlecookingequipmentwithhighercubicfeetperminute(CFM)requirementsandcandeliverequivalentCFMmuchmore
efcientlythanotherthanotherltrationsystems.WhencomparingtheMagicLung
®
withotherblowerunitsmadebyothermanufacturers,usethe“EquivalentCFM”.
# RatingsinaccordancewiththeStandardTestCodebytheEnergySystemsLaboratoryoftheTexasEngineeringExperimentStation.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Rev. 0210A

















