Specification Sheet

1000 N. Greenville Ave.  P.O. Box 830426  Richardson, TX 75083  [phone]
Rev. 0316AL156
FILTER
WALL MOUNT SIDE VIEW
FILTER
FILTER
ISLAND SIDE VIEW
Remote Blower Filters and Accessories
Stainless Steel Ba󰀪e Filters
Island Wall Mount
T-20SS
B-20 SS
MODEL T-20SS
Island hoods have two 20” lters
in a “V”. Wider hoods should use
more than one “V” bank of lters
MODEL B-20SS
Filter Length 20”. Specify one lter
for each 21” of top hood width.
ACCESSORY KITS
Order one accessory kit for each Vent-A-Hood remote blower. Accessory kits include lights, back draft dampers, and outlet collar for the appropriate blower. Acces-
sory kits are available for most hood models with halogen lights.
HALOGEN LIGHTS
ACCESSORY KIT FOR RM1000/RM1500
INCLUDES LED LIGHTS, TWO STAGE LIGHT SWITCH, SOLID STATE MOTOR CONTROL SWITCH
(VARIABLE SPEED), AND 10” DAMPER ASSEMBLY INSTALLED IN HOOD.
MODEL NUMBER APPLICATION
+
HOOD WIDTHS* # OF LIGHTS KIT AMPS
ACC.KIT-W-H2 WALL MOUNT 24" - 41" 2 0.5
ACC.KIT-W-H3 WALL MOUNT 42" - 53" 3 0.5
ACC.KIT-W-H4 WALL MOUNT 54" - 66" 4 0.5
ACC.KIT-I-H4 ISLAND 36" - 59" 4 0.5
ACC.KIT-I-H8 ISLAND 60" - 66" 8 0.5
+USE WALL MOUNT MODELS FOR UNDER CABINET HOODS AND WALL MOUNT LINER INSERTS. USE ISLAND MODELS FOR ISLAND LINER INSERTS.
* LISTED WIDTHS ARE FOR STANDARD MODELS ONLY. PLEASE CONTACT THE FACTORY FOR INFORMATION ABOUT KITS FOR LINER INSERTS OR CUSTOM HOODS.
ADD MODEL P1500R FOR MOTOR CONTROL WALL SWITCH ASSEMBLY (ORDERED WITH HOOD)
CHOOSE THE VENT-A-HOOD YOU DESIRE
 Choose your Vent-A-Hood model number
 Choose desired lter(s) (Island or Wall Mount) and quantity
 Choose desired accessory kit or kits needed
 Choose RM1000 or RM1500 remote ventilation