Full Product Manual

Servicing Your Airwasher

CLEANING THE GEAR

DO NOT submerge the gear in water. To clean any buildup of calcium or lime

from the gear “teeth,” brush with a soft bristled brush. The gear teeth should

be pointed toward the oor while brushing, otherwise deposits will fall into the

gear and cause it to malfunction.

REMOVAL OF THE GEAR AND COUPLING

1. Switch the unit off.

2. Unplug the power cord from the

outlet.

3. Remove the motor from the upper

housing.

4. Remove the coupling from the gear

by pushing the coupling down to-

wardthe fan and away from the gear

5. Pivot turn the gear 90 degrees, so

that it is laying on its side.

6. Gently pull one of the two motor

assembly arms approximately 1/8

of an inch away from the gear and

remove the gear from the motor

assembly.

7. Remove the locking ring from the

center shaft of the fan by prying it

up using a small screwdriver.

Fig 4. ... Push the coupling down ...

Fig 5. ... turn the gear 90

degrees ...

Fig 6. ... gently pull one of the motor

assembly arm 1/8 inch ...