Full Product Manual

7
Remove the upper housing from the lower housing and set it aside for a
moment. Take the lower housing over to your sink/bathtub/water source and
ll it with regular tap water up to the water line. Remember those two bottles
of Water Treatment Additive? Go grab those and pour them into the water
in the lower housing. Once it’s lled, carry it back over to the upper housing.
Place the upper housing back
onto the lower housing.
6. Turn it on
Plug the Airwasher in, press the power button, set the power setting to level
2, and enjoy the fresh air! At power setting 2, the Airwasher will need to run
continuously for about 5 days to properly condition the room it is in. After that,
you will notice the full impact of the Airwasher upon the air in your home!