Back Venting Guide

ManualsBrandsVentahood ManualsCooking42" Wall Mounted Range Hood

Back Vent Applications (Page 1 of 4)

Hood Model/Hood Style

Back Vent

Diagram

K250

(3-1/4” x 10”)

B100

(6” Round)

B200

(8” Round)

B300

(8” Round & 6” Round)

B400

(Two 8” Round)

K-Series Under Cabinet Hood and Liner Insert A Standard n/a n/a n/a n/a

6” Under Cabinet (Excluding K-Series) B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561

9” Under Cabinet B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561

CWEH6-K B VP559 n/a n/a n/a n/a

CWEH9 B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561

CWLH9 B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561

GTH-K D VP559 n/a n/a n/a n/a

XLH12 with 10” x 10” Duct Cover D n/a n/a VP515 or VP561 n/a n/a

ZTH D n/a n/a VP515 or VP561 VP513 & VP515 or VP561 n/a

18” Tall Wall Mount B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561

18” Tall Wall Mount - Special Deck at 9” C n/a VP513 VP561* VP513 & VP561* 2-VP561*

14” Tall Eurostyle Wall Mount (PD, SLD) D n/a VP513 n/a n/a n/a

18” Tall Eurostyle Wall Mount (EP, NEP, SEP) D n/a n/a VP561* n/a n/a

18” Tall Eurostyle Wall Mount (EPT, NEPT, SEPT) C n/a n/a n/a VP513 & VP515 or VP561 n/a

30” Tall Wall Mount C n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561

CWH B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561

TILT-Out (TLH) C n/a VP513 VP561* n/a n/a

JCH/A1 Designer Series D n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561

JCH/B1 Designer Series D n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561

JCH/C1 Designer Series C n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561

JCH/C2 Designer Series C n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561

JDH/C1 Designer Series C n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561

JDH/C2 Designer Series C n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561

JDH/D1 Designer Series C n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561

12” Tall Magic Lung Wall Mount Liner Insert B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561

*Can also use VP515(s) with duct cover (elbow(s) will extend above the top of the hood.

Note: This chart outlines the most common applications. Contact Vent-A-Hood or your distributor for more information.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE (Rev. 04/11a)

Summary of content (5 pages)

PAGE 1
Back Vent Applications (Page 1 of 4) Hood Model/Hood Style Back Vent K250 Diagram (3-1/4” x 10”) B100 (6” Round) B200 (8” Round) B300 (8” Round & 6” Round) B400 (Two 8” Round) K-Series Under Cabinet Hood and Liner Insert A Standard n/a n/a n/a n/a 6” Under Cabinet (Excluding K-Series) B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561 9” Under Cabinet B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561 CWEH6-K B VP559 n/a n/a n/a n/a CWEH
PAGE 2
Elbow and Transition Heights VP513: 6” Round - 8 1/2” Tall VP561: 8” Round to 6” x 8 1/2” When Fully Adjusted to 90 Degrees Rectangular - 7” Tall VP559: 3 1/4” x 10” - 4 1/4” Tall VP515: 8” Round - 10 3/4” Tall When Fully Adjusted to 90 Degrees Diagram A - Direct Back Vent (Drawing Not To Scale) Diagram B - Off the Top (Drawing Not To Scale) VP513 - 6” Round VP515 - 8” Round 3 1/4” x 10” Rectangular VP561 - 8” Round to 6” x 8 1/2” Rectangular 8” Round Side View Side View Diagram C - Within the Heig
PAGE 3
Back Vent Applications (Page 2 of 4) NOTE: Excluding the SLH6-K, Under Cabinet Range Hood and the KHSLD Liner Insert, all Vent-A-Hood range hoods duct out the top and can be back-vented only by use of transitions and/or elbows.
PAGE 4
Back Vent Applications (Page 3 of 4) NOTE: Excluding the SLH6-K, Under Cabinet Range Hood and the KHSLD Liner Insert, all Vent-A-Hood range hoods duct out the top and can be back-vented only by use of transitions and/or elbows.
PAGE 5
Back Vent Applications (Page 4 of 4) NOTE: Excluding the SLH6-K, Under Cabinet Range Hood and the KHSLD Liner Insert, all Vent-A-Hood range hoods duct out the top and can be back-vented only by use of transitions and/or elbows.