Instructions / Assembly
INSTALLATION DIAGRAMS
DIAGRAM 3:
CONNECTING POWER SUPPLY AND MOTOR WIRING (Not to Scale)
DIAGRAM 2:
NAILING PATTERN
DIAGRAM 1:
LOCATION OF VENTILATOR
For a “low prole” installation, ensure that the
ventilator is visible on only one side of the roof
by positioning the ventilator slightly below the
ridgeline.
After positioning the ange under the shingles, apply
a generous amount of roong compound between the
shingles and the ange approximately 1” inside the
perimeter of the ange. Secure the ange with
galvanized roong nails using the nailing pattern at right.
FLEXIBLE CONDUIT
SERVES AS GROUND
FOR THE MOTOR
GROUND SCREW
(attach ground from Power Supply to grounding screw inside thermostat)