Instructions / Assembly

INSTALLATION INSTRUCTIONS
FOR
GABLE MOUNTED VENTILATORS
Models:
VX2500, CX2500, VX2516, CX1600, VX2515, CX1500
Read all warnings and instructions before beginning to install this fan.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY OR EVEN DEATH
1. Do not attempt to use this fan with any solid-state speed control device.
2. Use this unit only in the manner intended by the manufacturer. If you have any
questions, contact the manufacturer.
3. Before servicing or cleaning this unit, switch power off at the service panel and lock
out to prevent power from being switched on accidentally. When service
disconnecting means cannot be locked, securely fasten a prominent warning tag to
the service panel.
4. Installation work and electrical wiring must be performed by a qualified person in
accordance with all applicable codes and standards, including fire-rated construction.
5. When cutting or drilling into a wall or ceiling, do not damage electrical wiring and
other hidden utilities.
6. The combustion airflow needed for safe operation of fuel-burning equipment may be
affected by this unit’s operation. Follow the heating equipment manufacture’s
guideline and safety standards such as those published by the National Fire and
Protection Association (NFPA), and the American Society for Heating, Refrigeration
and Air-conditioning Engineers (ASHRAE), and the local code authorities.
CAUTION
1. This unit has an unguarded propeller. Do not use in locations readily
accessible to people or animals.
2. Mount with the lowest moving parts at least 8 feet above floor level.
3. For general ventilating use only. Do not use to exhaust hazardous or
explosive materials and vapors.
4. Carbon monoxide is an odorless, colorless gas that can kill. It may be
drawn into the house by operating this fan if your fuel-burning equipment
is not properly maintained, or if you lack adequate attic intake vents.
VENTAMATIC, LTD.
100 WASHINGTON STREET, MINERAL WELLS, TX 76068-0728
PHONE: [phone] - FAX: [phone] - www.bvc.com