User Manual

ManualsBrandsventec ManualsPower Bankventec VenVolt 2 802.3af/at/bt 26400 mAh Power Bank

PRODUCT SPECIFICATIONS:

• Ports:

• USB-C (In/ Out)

• USB-A (Out)

• 24V Gigabit PoE (Out)

• LAN (In)

• PoE++ 802.3af/at/bt (Out) LAN (RJ45 Gigabit)

• PoE Output: 802.3af/at/bt 24V Gigabit PoE

• USB-A Output: 5V/3A,9V/2A,12V/1.5A 18W (max.)

• LED: Battery Indicator Light (100%, 75%, 50%, 25%) USB-C

(Input/ Output)

• USB-C Input: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A

• USB-C Output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A, PPS

3.3- 21V/3A

• Battery Type: Lithium Polymer Battery

• Battery Capacity: 26400mAh/ 98Wh Recharging Time: 3Hrs

VenVolt 2 802.3af/at/bt

26400 mAh Power Bank User Manual

www.ventev.com/infra sales@ventev.com 800.851.4965

Summary of content (6 pages)

PAGE 1
VenVolt 2 802.3af/at/bt 26400 mAh Power Bank User Manual PRODUCT SPECIFICATIONS: • Ports: • USB-C (In/ Out) • USB-A (Out) • 24V Gigabit PoE (Out) • LAN (In) • PoE++ 802.3af/at/bt (Out) LAN (RJ45 Gigabit) • PoE Output: 802.3af/at/bt 24V Gigabit PoE • USB-A Output: 5V/3A,9V/2A,12V/1.5A 18W (max.) • LED: Battery Indicator Light (100%, 75%, 50%, 25%) USB-C (Input/ Output) • USB-C Input: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A • USB-C Output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A, PPS 3.
PAGE 2
VenVolt 2 802.3af/at/bt 26400 mAh Power Bank User Manual APPLICATION Access Point 48V PoE+Data Output USB-C Access Point 24V PoE+Data www.ventev.com/infra sales@ventev.com 800.851.
PAGE 3
VenVolt 2 802.3af/at/bt 26400 mAh Power Bank User Manual OVERVIEW • The VenVolt 2 Power Bank is the perfect accessory for any WISP technician or wireless engineer. Power your devices with USB-A, USB-C, 24V PoE, and PoE++ (802.3bt). • Carry 26400 mAh of power with you up a tower to remotely power your devices. • The VenVolt 2 Power Bank is temperature resistant and also features protection from various factors such as input overvoltage, output overvoltage, short circuit, and incorrect insertion.
PAGE 4
VenVolt 2 802.3af/at/bt 26400 mAh Power Bank User Manual USER INSTRUCTIONS Operating guide  Use provided USB-C wall charger and USB-C to USB-C cable to connect VenVolt to USB-C charger. Be sure to fully charge your VenVolt before your first use. The battery is shipped under 30% due to regulation requirements.  Charging typically takes 3 to 4 hours to fully charge  Charging device PoE Device  To power a PoE device use your own ethernet cable to connect from VenVolt to your device.
PAGE 5
VenVolt 2 802.3af/at/bt 26400 mAh Power Bank User Manual USER INSTRUCTIONS LED Battery Level Indicator FCC Part 15 Text  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B device complies with Canadian ICES-3(B)/NMB-3(B).
PAGE 6
VenVolt 2 802.3af/at/bt 26400 mAh Power Bank User Manual TROUBLESHOOTING GUIDE Problem Possible Causes Corrective Actions The VenVolt2 cannot be fully charged. 1. The charging time is not enough. 2. The power source is defective 1. With no devices attached, charge the VenVolt2 for min. 3 hours. 2. Contact Ventev customer service. 1. Recharge the VenVolt2. The remaining power in the VenVolt2 cannot be read. The capacity is fully depleted. The VenVolt2 fails to supply power to devices. 1.