User Manual

VenVolt 2 802.3af/at/bt
26400 mAh Power Bank User Manual
www.ventev.com/infra [e-mail] 800.851.4965
USER INSTRUCTIONS
Operating guide
 Use provided USB-C wall charger and USB-C to USB-C cable to connect VenVolt to USB-C charger. Be sure to fully
charge your VenVolt before your first use. The battery is shipped under 30% due to regulation requirements.
 Charging typically takes 3 to 4 hours to fully charge
 Charging device PoE Device
 To power a PoE device use your own ethernet cable to connect from VenVolt to your device.
 Move select switch from Off to 4 for PoE++ port
 Move select switch from Off to 3 for 24V Gigabit PoE port
 USB-C port is disabled if switch is set to 3 or 4
 Charging laptop or phone with USB-C port:
 To power a USB device use included cable or your own cable
 Move select switch to Off
 Battery will automatically detect a device has been connected and charging will begin.
 Charging a device via the USB-A port:
 The USB-A port is on when select switch is set to 3 or 4. When the select switch is set to OFF only the USB-C port is
active.
Safety Precautions
 Do not expose the product to fire or other high-temperature environments. The recommended usage temperature is
between 14 degrees F to 113 degrees F.
 Do not expose the product to water
 Stop using is any of the following conditions occur: electrolytic liquid leakage, overheating, color change, or other
unusual conditions.
 Do not short circuit the positive (+) and negative (-).
Maintenance
 Do not expose the VenteVolt2 to direct sunlight for long periods of time or leave it any place with high temperature or
high humidity.
 Discharge and recharge the VenVolt2 periodically if you don’t plan to use it for an extended period of time.