Installation Guide

Register Installation Instructions and Tips
Width
Step 1 - Measure the opening
over which the register needs to
be installed. For rectangular
openings measure the width and
height of the opening in inches.
For square openings, measure
one of the sides in inches.
Step 2 - Open the Register
package and locate the screws
included in the package.
Step 3 - Place the front facing
register against the wall/ceiling
and ensure that screw holes line
up with the holes in the wall.
Step 4 - Using a screwdriver,
install the screws through the
register into the wall. Tighten the
screw to fix the register firmly into
the wall.
Caution: Do not OVERTIGHTEN
the screws to avoid bending or
breaking of the product.
Step 5 - Locate the Damper
handle and open it or close it for
the desired air flow.
Height