Instructions / Assembly

see the pictures below. Only the frame needs to be installed after removing the
grille as they come packaged together. If
it is a replacement, then after removing
the grille, remove the old frame by
removing the screws. Slide in the new
frame and hold it in place using the built-
in tabs. Secure it with screws. Lastly, you
can attach the grille (face) to the frame
and you are done. On attachment, the
latches will go on the top and take apart
hinges at the bottom.
Step 3 – If it is a new installation, then we
recommend the use of a trained and
licensed HVAC technician. This process
can require identifying the proper
location for the filter grille, cutting the
sheet rock to correct size and securing
the hole, removing insulation, etc., so
that the filter frame can be installed
properly.
Above instructions are property of Venti Air Products and copyright has been applied. They cannot be used or copied
for any other purpose except for the installation from Venti Air products, without the express and written permission of
Venti Air Products.