Ventray 13.
INTRODUCTION The scheme is created based on 64 bit Amlogic972 Android chip, Cotex A55 1.8GHz Octa-core CPU, Android operating system, which supports Android Mobile Phones and iPhone Wireless Miracast/Airplay, built-in 2GB DDR4 and 16GB memory. It processes powerful multimedia audio and video processing capabilities, supports 4K/8K ultra high definition video playback, built-in graphic processing unit, and capacitive touch screen. The scheme uses highperformance Wi-Fi.
SPECIAL FEATURE A. Various signal interfaces, no external chip expansion required Support HDMI, Video input, TF card, USB. AV INPUT USB 2.0 B. Built-in quality image processing engine MACE-PRO4 image processing engine can eliminate noise from TV or network video, remove the loss of details and color in video signal transmission, thus improve picture quality, recover all the content details and restore natural and detailed image of the world.
SPECIAL FEATURE C. Super multimedia processing capability, support max 4K/8K H. 265 video Support Full format Ultra HD Ultra HD 4K 8K Audio and video format H. 265 Ultra HD 4K/8K, HD smooth D. Support mobile phone wireless Miracast Support Android Miracast, iphone Airplay wireless Miracast. .3.
TECHNICAL SPECIFICATIONS AND PARAMETERS Product Name 13.3" Automobile Business Entertainment System Pixel Resolution 1920(W) x 3(RGB) x 1080(H) Output Port Audio: stereo Video: complex video signal output (AV) USB port MS/MMC/SD card port Video System PAL / NTSC / AUTO Power Voltage DC 12V/1.5A Power Consumption About: 12W; Rating Circuit: 800mA; Rating Power: 9.6W Working Temperature -20°C ~ +60°C Working Humidity 15~75% (No water drop is coagulated) Video Decoder Support HEVC / H.
FUNCTION INTRODUCTION 11 12 1 2 3 4 5 6 7 8 9 10 13 14 15 16 17 1. LED Settings 2. Function of Android system to return to the previous level 3. Back to main interface of Android system 4. Shortcut icon function (slide each process to end) 5. Short press to turn on and long press to turn off; Short press to turn off the display screen when working 6. Shortcut operation 7. Hidden icon 8. Water light 9. LED light 10. System settings 11. HDMI input 12. Reset 13. TF card interface 14.
INSTALLATION 2 2 Plastic Ring 1 1 1. After press the switch down, as shown in figure 1. 2. Put the matching model of pipe size plastic ring in groove, as shown in figure 2. 3 3 3. Adjust the bracket spacing to the left/right,adjust the spacing to proper car model pillow pipe, then the bracket snaps into pipe. Switch Lock 4 4. Open the switch lock of adjusting direction, move forward and backward adjust to appropriate length, then lock the switch lock. .6.
SYSTEM SETTING A. Language setting Click “setting” button under the menu and choose “Language & input”. Select “Language” project and then select corresponding language. B. Function setting of Wi-Fi Click “settings” button under the main menu and open “Wi-Fi” and select suitable access source. .7.
SYSTEM SETTING C. Setting of car logo Click “settings” button under the main menu, select “Display” and then click “Boot logo” and input password “ANDRSE” and then select corresponding car logo (show changed car logo after restarting). D. Screenshot settings Click “settings” button under the main menu, select “System” and then select “Screenshot” in the display pictures, input password “ANDRSE” and then conduct corresponding operations. .8.
SYSTEM SETTING E. Shortcut operation Click “ ” icon under the main menu, to display four function selections. 1 1. Ambient lighting selection 2. LED light adjust 3. FM 4. Volume adjust 5. Screen brightness .9.
SYSTEM SETTING Atmosphere lights: Click “settings” button under the main menu, select “Led light effect”, there are 7 different colors of atmosphere lights, click the corresponding color on the screen, the LED light on the back of the device will show the corresponding color, and click "CLOSE" to turn off . G. Change the theme 1. Click "Settings" 2. Find "Display" and click to enter. 3. Click "Factory settings", Enter password: ANDRSE and click “OK”. 4. Click “Theme Setting”.
FUNCTION OPERATION A. File explorer Click the icon “File Browser” under the main menu, enter next level menu and then conduct document copy, paste, move and deletion and other corresponding operations. B. Mobile phone interconnection of Android system 1. Firstly, click “Settings” button under the main menu and open “Wi-Fi” function and then return upper level to click “MiraCast” icon, enter sub-menu to open “Enable Mcast” and then select the name of this mobile phone device. .11.
FUNCTION OPERATION 2. Select “Multi-screen interaction” in the Android system and find the corresponding machine device name needed to connect and then click to select. 3. After successful connection, picture operated on Mobile phone will synchronously display on the device. 4. Select “Multi-screen interaction” of mobile phone, and then select “Back to my device” and then you can exit mobile phone interconnection. .12.
FUNCTION OPERATION C. Apple iOS 1. Enter into “Wi-Fi” function option of the mobile phone firstly, turn on Wi-Fi hot spot of the mobile phone. 2. Choose “HappyCast” icon in menu. 3. At the same time open “AirPlay” of iPhone (The “AirPaly” function option will appear when you slide the mobile phone main interface from below upward). 4. Choose corresponding AirPlay device name from the mobile phone, open mirror image.
FUNCTION OPERATION D. Connect to the network Set Wi-Fi hot spot of mobile firstly, and then set the access code. Turn on the Wi-Fi function of android monitor, to find Wi-Fi hot spot name of corresponding mobile phone, click to access. (Input password if necessary) 1. Enter into mobile network share of the smart phone, launch 4G (or 3G) network, Re-enter into WLAN hot spot, open the interface of mobile phone device number to set hot spot name, password and save them at last. 2.
DEVICE CONNECTION Red ACC Yellow +12V Black GND Fuse box (Yellow) Video in (White) Audio L in (White) Audio R in (White) Audio L out (Red) Audio R out
DEVICE NOTES Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
