Frigate HRV-ERV Installation Guide

Frigat_80-150-01
www.vents-us.com
Vents-US
400 Murray Road, Cincinnati, OH 45217, USA
Tel: [phone], Fax: [phone]
E-mail: [e-mail]
FRIGATE ERV 80
FRIGATE HRV 120
FRIGATE ERV 120
FRIGATE HRV 150
FRIGATE ERV 150
FRIGATE ERV 80 R
FRIGATE HRV 100 R
FRIGATE ERV 100 R
FRIGATE HRV 120 R
FRIGATE ERV 120 R
FRIGATE HRV 150 R
FRIGATE ERV 150 R
FRIGATE ERV 80 EC
FRIGATE HRV 120 EC
FRIGATE ERV 120 EC
FRIGATE HRV 150 EC
FRIGATE ERV 150 EC
FRIGATE ERV 80 R EC
FRIGATE HRV 100 R EC
FRIGATE ERV 100 R EC
FRIGATE HRV 120 R EC
FRIGATE ERV 120 R EC
FRIGATE HRV 150 R EC
FRIGATE ERV 150 R EC
INSTALLATION GUIDE
INSTALLATION
Tools required
Pencil Drill Screwdriver Dowel Screws
MOUNTING
While mounting the unit provide enough access for maintenance or repair work.
The minimum recommended clearances between the unit and the adjoining walls are given in the gure below.
When selecting a mounting location of the unit provide free opening of the service panel.
The units are designed for celling or wall mounting.
While installing the unit ensure convenient access for subsequent maintenance and repair.
Keep the recommended minimum distances to the walls for all mounting variants as shown below.
The fasteners are not included in the delivery set and must be purchased separately. While selecting appropriate fasteners consider the material of the mounting surface as well
as the weight of the unit, refer to technical data. Fasteners selection and unit mounting should be done by service technicians.
To mount the unit to the ceiling use belts rigidly xed to a horizontal surface or threaded rods and expansion anchors.
min10"
min A”
The belts, threaded rods and expansion anchors are not included in the delivery set.
HEAT (ENERGY, HEAT AND ENERGY)
RECOVERY VENTILATOR
MODEL DIMENSION A
FRIGATE HRV/ERV 80 (R) (EC) 21”
FRIGATE HRV/ERV 150 (R) (EC) 25”
FRIGATE HRV/ERV 120 (R) (EC) 24”