Frigate User’s Manual

6
HRV/ERV 80/100/120/150 (R) (EC) (L)
www.vents-us.com
TECHNICAL DATA
MODEL
Frigate HRV 80 Frigate HRV 80 R Frigate HRV 80 EC Frigate HRV 80 R EC Frigate HRV 100 Frigate HRV 100 R Frigate HRV 100 EC (L) Frigate HRV 100 R EC Frigate HRV 120 (L) Frigate HRV 120 R Frigate HRV 120 EC (L) Frigate HRV 120 R EC Frigate HRV 150 Frigate HRV 150 R (L) Frigate HRV 150 EC (L) Frigate HRV 150 R EC
Supply voltage, 60 Hz [V] 120
Rated input power [W] 74 61 154 94 156 198 192 186
Maximum current [A] 0.6 0.9 1.3 1.4 1.3 2.5 1.6 2.5
Air capacity [cfm @ 0.4 in. w.g.] 46 61 119 106 132 175 137 162
Transported air temperature [F (°C)] -13(-25) up to +122(+55)
Insulation thickness [inch (mm)] polystyrene 1” (25)
Extract filter: material/filtration class Poret PPI 20/MERV6
Supply filter: material/filtration class Poret PPI 20/MERV6
Connected air duct diameter [inch (mm)] Ø 5” (125)
Weight
lbs 29.8 35.3 29.8 35.3 51 62 51 62 44 57.3 44 57.3 46.3 53 46.3 53
kg 13.5 16 13.5 16 23 28 23 28 20 26 20 26 21 24.4 21 24.4
Heat recovery core type cross-flow
Heat recovery core material polystyrene
MODEL
Frigate ERV 80 Frigate ERV 80 R Frigate ERV 80 EC Frigate ERV 80 R EC Frigate ERV 100 Frigate ERV 100 R Frigate ERV 100 EC (L) Frigate ERV 100 R EC Frigate ERV 120 (L) Frigate ERV 120 R Frigate ERV 120 EC (L) Frigate ERV 120 R EC Frigate ERV 150 Frigate ERV 150 R (L) Frigate ERV 150 EC (L) Frigate ERV 150 R EC
Supply voltage, 60 Hz [V] 120
Rated input power [W] 74 61 154 94 156 198 192 186
Maximum current [A] 0.6 0.9 1.3 1.4 1.3 2.5 1.6 2.5
Air capacity [cfm @ 0.4 in. w.g.] 46 61 111 106 124 162 127 162
Transported air temperature [F (°C)] -13(-25) up to +122(+55)
Insulation thickness [inch (mm)] polystyrene 1” (25)
Extract filter: material/filtration class Poret PPI 20/MERV6
Supply filter: material/filtration class Poret PPI 20/MERV6
Connected air duct diameter [inch (mm)] Ø 5” (125)
Weight
lbs 29.8 35.3 29.8 35.3 51 62 51 62 44 57.3 44 57.3 46.3 53 46.3 53
kg 13.5 16 13.5 16 23 28 23 28 20 26 20 26 21 24.4 21 24.4
Heat recovery core type cross-flow
Heat recovery core material enthalpy membrane
TECHNICAL DATA
The unit is designed for indoor application at ambient temperature from+34 ˚F (+1 ˚C) up to +104 ˚F (+40 ˚C) and relative humidity up
to 80 %.
Hazardous parts access and water ingress protection rating:
• IP 44 for the unit motors
• IP 22 for the assembled unit connected to the air ducts
The unit design is constantly being improved, so some models may be slightly different from those ones described in this manual.