Vent-US Frigate HRV 150 Product Specs

PRODUCT
SPECIFICATIONS
TECHNICAL
DATA
Tel: [phone]
513-348-3853
Fax: [phone]
[e-mail]
VentsUS.com
11013 Kenwood Road,
Cincinnati, Ohio 45242
Frigate HRV 150
HEAT RECOVERY VENTILATION
2018/10
DESCRIPTION
VENTS’ HRV 150 are the complete whole house ventilation
system designed to bring a continuous supply of fresh air into
the house while exhausting an equal amount of stale air.
Five year warranty.
CASING
• Steel casing is covered with high-quality multilayer alu-
minium and zinc alloy to prevent corrosion.
• The casing is equipped with a switch to turn the ventilator
off when the service panel is opened.
AIR FILTRATION
• Washable MERV 6 air filters in exhaust and supply air
streams.
• Optional supply: anti grease aluminum filter.
HEAT RECOVERY CORE
Polystyrene cross-flow core ensures efficient heat recovery.
FANS
The unit is equipped with supply and exhaust centrifugal fans
with forward curved blades and build-in thermal overheating
protection with automatic restart. The electric motors and impel-
lers are dynamically balanced.
DEFROST SYSTEM
To protect the Recovery Core, an antifreeze electronic pro-
tection system is applied. It switches the supply fan off ac-
cording to the temperature sensor settings. Warm extract air
defrosts the HRV core then the supply fan switches on and the
ventilator continues operating under rated conditions.
CONSTANT FLOW
Frigate HRV 150 CF has an automatic constant air flow control
function to keep the air flow in supply and exhaust air ducts
constant even in case of variable air resistance.
This function is provided with the integrated air flow control
units. The electronic sensors convert the actual air flow to
the analogue signal that is proportional to the air flow in the
air duct. These signals are transmitted to the controller that
controls the rotation speed of a respective fan in such a way
that the actual rotations speed is equal to the set value.
MANUAL BALANCING
Manual balancing is a standard balancing system. Fan speed
manually adjusted by operating on units controller (Built-in
control panel with independent fan speed adjustment 0%-
100%).
CONTROL BOARD
The unit incorporates an integrated control system with follow-
ing functions:
• Operation mode switch.
• Airflow balancing enabled by supply and exhaust fan inde-
pendent speed adjustment from 0 to 100% (percentage is
displayed on built in screen).
• Automatic recovery core frost protection.
• External control device connection (up to 5 at the same
time).
SUITABLE FOR:
Bathroom / kitchen / apartments / cottages / small offices.
Fans speed and temperature
sensor set up buttons
Screen
Terminals to connect external
control devices
Three-position mode switch