Installation Instructions

The fans are in-line mixed type fans designed for
extract ventilation of rooms heated in winter time.
Delivery set includes:
1. Fan - 1;
2. Screws with plugs - 4;
3. User’s manual;
4. Packing box.
Fans are compatible with 3 15/16" ( mm
15/16" mm 7/8" mm 6 5/16" mm
7 7/8" mm diameter ducts.
motor
in-line
An air duct at least 40 inches (1 meter) long should be
connected to an inlet flange in case of horizontal fan
mounting; a canopy should be installed on an inlet flange
in case of vertical mounting. Outlet flange should always
be connected to an air duct. M unting is
4-1 . Air motion must coincide with direction of i
ndicator on the fan case.
Input: 120V AC 60Hz.
Fans are designed for
continuous operation without disconnection from network.
Protection rating from access to dangerous parts and
water penetration is Fans can be operated at
ambien temperatures between and
Fans
are made of white plastic.
100 ),
4 (125 ), 5 (150 ), (160 ),
(200 )
are equipped with higher-power
Fans are supplied with an internal three-position
speed switch (fig. 3), which provides fan operation in
three different function modes:
“0”– turned off, the fan is not operating;
“I” – the fan is operating at minimum speed;
“II” – the fan is operating at maximum speed.
Fans may be mounted either vertically or horizontally
(fig. 1). Fans may be used either separately or as part of
a set for parallel or mounting (fig. 2). Parts that
come with connecting units are delivered separately.
o shown on
Fig. 2
IPX4.
t +37°F +107°F
(for the details, please, see the manufacturer's catalog).
Fan construction is constantly being improved, that is
why some models can differ slightly from those described
in this manual models.
“ ” models .
Scheme of fan connection to the
power network is shown on Fig. 3.
S
WARRANTY
Production meets standard
the territory of the USA and Canada.
Manufacturer guarantees normal operation of the
unit 60 months from the da of subject to
the transport, storage, mounting
and operation rules.
If of sales date is absent, warranty period is
calculated from the .
In case of
warranty period consumer has the right to
it.
the following
address:
Bodor Vents, LLC
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: [phone]
e-mail: [e-mail]
Manufacturer is not responsible for damages
misuse of the unit or gross
mechanical .
Owner of the unit must follow the
manual.
operating
requirements in
for te resale,
compliance with
proof
production date
failure due to faulty equipment
, the
exchange
The unit can be exchanged at
resulting from
alteration
guidelines set
forth in the
of dirt and dust
regularly by using a soft, wet cloth and mild detergent
Do not allow liquids to come in contact with the
electric motor. Wipe surfaces dry after cleaning.
Fan surfaces need to be cleaned
(Fig. 13-18).
Recylcle at the end of unit's
service l
Do not dispose of with other trash.
ife.