VENTS TT Silent Inline Mixed- Flow Fans Guide

ManualsBrandsVents-US ManualsBooster Fans & AccessoriesVENTS-US 6" In-Line Duct Fan

ventilation-system.com

MIU_06-01

Bodor Vents, LLC DBA: VENTS-US

11013 Kenwood Road Cincinnati, Ohio 45242

Phone: (513)348-3853

e-mail: sales@ventsus.com

IN-LINE MIXED TYPE FANS

TT SILENT 100/125/150

INSTALLATION GUIDE

INSTALLATION

Tools required

Pencil Drill Screwdriver Dowel (4 pcs.) Screws (4 pcs.)

MOUNTING

Fans may be mounted either vertically or horizontally. We recommend minimum 8’ of insulated exible duct between any exhaust grill and fan for low noise level. . Outlet

ange should always be connected to an air duct.

min 8 inch min 8 inch

Typical installation of the fan

Summary of content (4 pages)

PAGE 1
INSTALLATION GUIDE IN-LINE MIXED TYPE FANS TT SILENT 100/125/150 TT SILENT 100/125/150 INSTALLATION Tools required Pencil Drill Screwdriver Dowel (4 pcs.) Screws (4 pcs.) MOUNTING Fans may be mounted either vertically or horizontally. We recommend minimum 8’ of insulated flexible duct between any exhaust grill and fan for low noise level. . Outlet flange should always be connected to an air duct. Typical installation of the fan min 8 inch ventilation-system.
PAGE 2
The fan must be connected using durable, insulated and heat-resistant cables and wires. Connect the cables according to the wiring diagram. Connection of the fan and standard wall socket BREAKER BOX BREAKER BREAKER BOX GREEN GROUND SCREW GREEN GROUND SCREW BREAKER 120VAC, 60Hz 120VAC, 60Hz WALL SOCKET EARTH EARTH FAN FAN QF N ~120V 60Hz L ventilation-system.com Bodor Vents, LLC DBA: VENTS-US 11013 Kenwood Road Cincinnati, Ohio 45242 Phone: (513)348-3853 e-mail: sales@ventsus.
PAGE 3
1) Disconnect the fan from power supply. 2) Unscrew the screws from the fixing brackets. 3) Deinstall the fixing brackets. Fan installation QF 1 2 3 ventilation-system.com Bodor Vents, LLC DBA: VENTS-US 11013 Kenwood Road Cincinnati, Ohio 45242 Phone: (513)348-3853 e-mail: sales@ventsus.
PAGE 4
) Remove the fan from the casing. 5) Mark holes on the wall. 6) Drill the holes and insert the expansion anschors. 7) Fix the fan. 8) Install the fan into the casing 9) Connect air ducts ventilation-system.com 4 5 6 7 8 9 Bodor Vents, LLC DBA: VENTS-US 11013 Kenwood Road Cincinnati, Ohio 45242 Phone: (513)348-3853 e-mail: sales@ventsus.