VENTS TT Silent M 315 Inline Mixed Flow Fans Guide

www.ventsus.com

MIU_07-01

Bodor Vents, LLC DBA: VENTS-US

11013 Kenwood Road Cincinnati, Ohio 45242

Phone: (513)348-3853

e-mail: sales@ventsus.com

INLINE MIXED-FLOW FANS IN SOUND-INSULATED CASING

TT SILENT M 100/125/150/160/200/250/315

INSTALLATION GUIDE

Tools required

Pencil Drill Screwdriver Dowel (4 pcs.) Screws (4 pcs.)

MOUNTING

While mounting the fan provide extra protection against water ingress.

Сonnect an air duct on both sides of the fan .

We recommend minimum 40’ of insulated exible duct between any exhaust grill and fan for low noise level. .

min v40 vinch

PAGE 1
INSTALLATION GUIDE INLINE MIXED-FLOW FANS IN SOUND-INSULATED CASING TT SILENT M 100/125/150/160/200/250/315 Tools required Pencil Drill Screwdriver Dowel (4 pcs.) Screws (4 pcs.) MOUNTING While mounting the fan provide extra protection against water ingress. Сonnect an air duct on both sides of the fan . We recommend minimum 40’ of insulated flexible duct between any exhaust grill and fan for low noise level. . 2 minv40vinch minv40vinch 3 www.ventsus.
PAGE 2
1) Disconnect the fan from power supply. 2) Mark holes on the wall. 3) Drill the holes and insert the expansion anschors. 4) Fix the fan. 5) Connect air ducts QF 1 2 5 3 4 5 Connection of the fan and standard wall socket BREAKER BOX BREAKER GREEN GROUND SCREW 120VAC, 60Hz WALL SOCKET EARTH www.ventsus.com Bodor Vents, LLC DBA: VENTS-US 11013 Kenwood Road Cincinnati, Ohio 45242 Phone: (513)348-3853 e-mail: sales@ventsus.
PAGE 3
The fan must be connected using durable, insulated and heat-resistant cables and wires. 1) Disconnect the fan from power supply. 2) Remove the cover from the terminal block. 3) Remove the cable clamp. 4) Connect the cables according, install the cable clamp. 5) Install the terminal block cover 6) Сonnect the fan from power supply. ТТ Silent-М 100/125/150 1 QF 2 3 5 6 2 3 5 6 X PE N N ~120V 60Hz L L 4 ТТ Silent-М 200/250/315 1 QF N ~120V 60Hz L X PE N L 4 www.ventsus.