Car Amplifier User Manual

11
USER’S INSTRUCTIONS
LEARN RC5
ERROR
To use this functionality, select ON then exit the set-up. The
screen displays LEARN RC5 ERROR. Now press any key from
the remote control. The operation is complete. The preamplifier
displays back its welcome screen.
[EXIT]
Push lightly on the Selection knob to exit at any step from the
set-up program. Parameters are now stored within the
preamplifier.
In normal mode (outside set-up) the stand-by mode can be activated
from the remote control. It will put the mono power amplifier blocks
(V100A+) in stand-by mode (to lower the current consumption when
the appliances are not in use).