PLV7615H 15” LCD TV INSTRUCTION MANUAL Need More Help? DO NOT RETURN THIS PRODUCT TO THE STORE Please visit online help at http://www.venturer.com E - 16 PLV76156S7_ENG_IB_UL_091221.
SAFETY PRECAUTIONS PLACEMENT INFORMATION • Do not use this unit in places which are extremely hot, cold, dusty or humid. • Do not restrict the air flow of this unit by placing it somewhere with poor air flow, by covering it with a cloth, by placing it on bedding or carpeting. SAFETY INFORMATION CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers) that produce heat.
QUICK INSTALLATION Before turning on your television set for the first time, be sure to place it on a solid stable surface. To avoid danger, do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear and be sure to leave sufficient gaps around the unit as shown. 2 3/8" 2 3/8" 2 3/8" 1. 2. 3. 4. Connect the TV antenna. Connect the power cord. Press the / ON button to turn on the unit.
CONTENTS USING HEADPHONES / EARPHONES ............... 9 INSTALLATION ............................................ 9 TV SETUP ............................................. 10 - 12 Picture Menu ....................................... 10 Audio Menu ....................................... 10 TV Menu .............................................. 11 Setup Menu ...................................... 11 - 12 MAINTENANCE ..................................... 12 TROUBLESHOOTING GUIDE ...............
CONTROL REFERENCE GUIDE REMOTE CONTROL 1) MUTE Button Press to turn off the sound. 2) MENU Button Press to display the on-screen menu or switch back to the previous menu screen. 3) CURSOR ( , , , ) Buttons Use to highlight selections on a menu screen and adjust certain settings. ENTER Button Confirm selection on a menu screen. 4) DISPLAY Button Press to display information on the current channel. 5) VOL + / VOL - Button Press to increase/decrease the volume.
CONTROL REFERENCE GUIDE FRONT & SIDE VIEWS 7 1 2 8 3 4 5 9 6 10 11 12 13 14 1. AUDIO IN (Left/Right) / VIDEO IN jacks / ON button 2. Turns the unit on and off. 3. MENU button Enters the on-screen TV menu. 4. FUNCTION button Selects TV / AV / HDMI mode. 5. CH / CH buttons Press to confirm selections on the TV menu screen and / to change TV channels. 6. VOL + / VOL - controls Adjusts the volume level and highlights selections (Left & Right) on the TV menu screen. 7. Color LCD screen 8.
CONNECTIONS CONNECTING A TV ANTENNA To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system To Home Antenna terminal COAX Cable (If not using a Cable box) Combination VHF / UHF antenna (ATSC / NTSC signal) TV ANTENNA To TV Antenna terminal Separate VHF or UHF antenna (ATSC / NTSC signal) NOTE For optimal reception of over-the-air TV broadcasts, we recommend that you use an external f
CONNECTIONS CONNECTING TO HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes and other digital AV devices. HDMI has the capability to support standard, enhanced or high-definition video plus standard to multichannel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of up to 2.
USING HEADPHONES / EARPHONES • Turn down the volume before connecting headphones / earphones to the unit, then adjust the volume to your desired level. • When headphones / earphones are connected, no sound will come from the front speakers. NOTE Excessive sound pressure from headphones / earphones can cause hearing loss. INSTALLATION INSTALLING / REMOVING THE BASE STAND WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand.
TV SETUP PICTURE MENU 1. Press the MENU button. 2. Press ENTER or button to highlight Picture Mode. 3. Use the or button to select other options (Contrast, Brightness, Sharpness, Color, Tint, Aspect Ratio & Color Temperature). 4. Use the ENTER or button to make adjustment. The screen will adjust to your selected setting immediately. 5. Repeat steps 3 and 4 to adjust other options. 6. To exit the TV SETUP MENU and return to the normal screen, press the MENU button.
TV SETUP TV MENU 1. Press the MENU button. 2. Use the or button to select TV setting. 3. Press ENTER or button to highlight Antenna, or button to select other then use the options (DTV Signal, Auto Scan, Auto Scan Add CH, Channel Skip & Channel Labels). 4. Use the ENTER or button to make adjustment. The screen will adjust to your selected setting immediately. 5. Repeat steps 3 to 4 to adjust other options. 6. To exit the TV SETUP MENU and return to the normal screen, press the MENU button.
TV SETUP Closed Caption Closed Caption Analog Closed Caption CC1 Digital Closed Caption Service1 Digital Caption Style To Move CC Mode Analog Closed Caption Digital Closed Caption Digital Caption Style : : : : Off CC Mode NOTE This function only works on ATSC (Digital Broadcast TV) programs broadcast with captions. Enter To Select Menu To Exit Select closed caption On, Off or CC on Mute. Select the analog closed caption. Select the digital closed caption.
TROUBLESHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) No power. • Ensure the AC power cord is connected. • The unit is not turned on. The remote does not function. • • • • TV Bad Picture (snow, multiple images, distortion, blurry) Remove any obstacles between the remote and the unit. Use the remote near the unit. Point the remote at the remote sensor on the unit. Replace the batteries in the remote with new ones. • Check the location of the antenna and adjust it if necessary.
LIMITED WARRANTY VENTURER ELECTRONICS (“VENTURER”) makes the following limited warranty. This limited warranty extend to the original consumer purchaser and is limited to non-commercial use of the product. Ninety (90) Day Parts & Labor Warranty VENTURER products purchased in the United States are warranted to be free from defects in materials or workmanship for a period of ninety (90) days from the date of their original retail purchase.
UNIT INCH 3 16 13 3/8 5 5 7/8 3 3/4 11 7/8 Printed in China 811-761591W050 © 2010 VENTURER Electronics Inc. E - 15 PLV76156S7_ENG_IB_UL_091221.
