WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
PRECAUTION Follow the advice below for safe and appropriate operation. ON PLACEMENT • Do not use the unit in places which are extremely hot, cold, dusty, or humid. • Place the unit on a flat and even surface. • Do not restrict the air flow through the ventilation slots by placing the unit on soft furnishings, by covering the unit with a cloth or by placing the unit on a carpet.
SYSTEM CONNECTIONS IMPORTANT Switch off the power before connecting speakers and other equipment. SPEAKER TERMINALS IMPEDANCE: 8 ohm (Ω) SPEAKER CORD CONNECTION Connect the wires with the printed red lines to the red (+) terminals and the plain-black wires to the black (-) terminals. NOTE : Connecting speakers other than the speakers supplied with the unit, may damage the unit. POWER CORD CONNECTION 1. Make sure that all the components and speakers are connected correctly. 2.
PARTS IDENTIFICATIONS 1) CD door 2) STEREO WIDE indicator 3) POWER button 4) OPEN / CLOSE button 5) REMOTE SENSOR 6) PHONES jack 7) CD STORAGE door 8) DISPLAY window 9) VOLUME control buttons 10) X-BASS button 11) STEREO WIDE button 12) REPEAT button 13) RANDOM / TUNING buttons 14) BAND button 15) FUNCTION button 16) DISC SKIP button 17) SLEEP button 18) SKIP/PRESET/MIN/HOUR buttons 19) PLAY / PAUSE button 20 STOP button 21) TIMER button 22) MEMORY/ CLOCK button 23) FM MODE selector - E5 - 2088_eng1.
DISPLAY 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. TRACK and CHANNEL indicators. FUNCTION indicators. SLEEP indicator. TIMER ON/OFF indicators. AM/PM indicators. X-Bass indicator. Band AM/FM indicators. Playback Indicator. STEREO indicator Pause indicator. 11. MEMORY indicator. 12. RANDOM indicator. 13. Indicators to show which disc holder of the disc tray is occupied. If a certain disc holder is empty, the corresponding number indicator will be off. 14. REPEAT mode indicators. 15.
ADJUSTING THE SOUND TO ADJUST THE VOLUME Press the VOLUME the sound. / buttons to adjust To increase the volume press here. TO USE THE X-BASS Press the X-BASS button to adjust the bass. The display will show: To decrease the volume press here. TR A CK X-BASS is designed specifically to boost the low frequency sound to obtain a more powerful bass. STEREO WIDE creates the feeling that the sound is being spread to the left and right, beyond the actual position of the speakers.
SETTING THE CLOCK To set the current time (Select POWER STANDBY mode) 1. Press the MEMORY / CLOCK button in clock mode. Hours flash. 2. Press the HOUR button ( or ) repeatedly to set PLAY/PAUSE repeatcurrent hour and press the edly to set the format of time (12 hour/24 hour). 3. Press the MEMORY/ CLOCK button to make the correct minutes flash. 4. Press the MINUTE buttons ( minutes and press MEMORY/ again to start the clock. or ) to set the CLOCK button AND To set the timer on (time to turn on) 1.
SETTING THE SLEEP TIMER 1. Press the SLEEP button while the power is on. "SLEEP 90" lights in the display. 2. Press and hold the SLEEP button to select the length of remaining time until the unit turns off. It changes the indicator in the following way: SLEEP SLEEP 90 SLEEP 80 SLEEP 10 ........SLEEP 20 The Sleep Timer is set and the SLEEP indicator lights in the display. Let go when required sleep time (in minutes) is shown.
PRESET TUNING 1. Press the FUNCTION button to TUNER. 2. Press the BAND button to select a band . 3. Tune into a station. 4. Press the MEMORY/ CLOCK button. 5. Use the UP/DOWN buttons to select the pre-set number. 6. Press the MEMORY/ CLOCK button to store the station to the pre-set number. TUNING INTO A PRESET STATION 1. Press the FUNCTION button to TUNER. 2. Press the BAND button to select the a band. 3. Press the PRESET buttons to preset number.
COMPACT DISC PLAYBACK 1. Press the FUNCTION button to CD. 2. Press the OPEN/CLOSE button to open the disc tray. TRACK 3. Place the first disc onto the disc holder, with the label side up. WARNING: • Before transporting the unit, take out all discs from CD tray. 4. Press the DISC SKIP button to revolve the tray clockwise. Place other disc(s) on the disc holder(s). 5. Press the OPEN/CLOSE button to close the tray. It takes a short while for your player to check the discs. TR A CK 6.
COMPACT DISC PLAYBACK (CONTINUED) Notes:1. During playback, disc tray can be opened to change/add disc and the current disc playback will not be interrupted but DISC SKIP button will become invalid. 2. The / SKIP buttons can only be used to choose a track of the current disc. To choose a track of another disc, DISC SKIP button should be pressed to get to the desired disc first. 3. Before transporting the unit, take out all discs from the CD tray.
COMPACT DISC PLAYBACK (CONTINUED) SHUFFLE PLAY - PLAYING IN A RANDOM ORDER IN STOP MODE 1. Press the DISC SKIP button to select a disc. 2. Press the RANDOM button, the word "RANDOM" will appear on the display. T RA CK 3. Press PLAY/PAUSE button. Some abnormal symbols will be shown on the display and a short period of time is needed for track shuffling, before playback can be started. RANDO M T RA C K Notes: 1.
COMPACT DISC PLAYBACK (CONTINUED) REPEAT PLAYBACK DURING PLAYBACK MODE T R AC K REPE AT ONE T R AC K REPE AT ONE DISC T R AC K REPE AT ALL DISC To Repeat the Current Track • Press the REPEAT button until REPEAT ONE appears on the display and the currently playing track will be played repeatedly until the STOP button is pressed. • SKIP and SEARCH can still be used during this function.
COMPACT DISC PROGRAMMED PLAYBACK A program of up to 32 tracks from all the available discs in the disc tray can be played in a preset order. 1. Press the MEMORY/ stop mode). CLOCK button (in 2. Press the DISC SKIP button to select the desired disc (the disc symbol ( ) shows which disc is selected). M EM O RY M EM O RY T RA C K TRAC K / 3. Press the desired track. SKIP buttons to select the 4. Press the MEMORY/ CLOCK button again to store this track in memory.
STOPPING AND CANCELLING PROGRAMMED PLAYBACK To stop programmed play for a moment: • Press the PLAY/PAUSE button and " Press this button again to resume playing. " will be displayed. T RA C K To add additional tracks during program playback: • Press the STOP button once, press the MEMORY/ CLOCK button until the track indication is "--" and then repeat steps 2 to 4 (Compact Disc Programmed Playback).
REMOTE CONTROL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. POWER/STANDBY button SOUND (STEREO WIDE) button TIMER button STOP button / SKIP buttons / / PRESET buttons MEM button TUNING /RANDOM button SLEEP button VOLUME +/- buttons FUNCTION button BAND button X-BASS button PLAY/PAUSE button button TUNING OPEN/CLOSE button DISC SKIP button USING THE REMOTE CONTROL CORRECTLY • Point the Remote Control at the REMOTE SENSOR located on the unit.
MAINTENANCE CLEANING CD If the CD skips or will not play, the disc may need cleaning. Before playing, wipe the disc from the centre out with a cleaning cloth. After playing, store the disc in its case. CLEANING THE UNIT Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft cloth. IMPORTANT NOTE Before transporting the unit, take out all discs from the CD tray. TROUBLESHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) GENERAL No sound.
SPECIFICATIONS GENERAL Power consumption Power requirements 100 W AC ~ 120V 60Hz Specifications subject to change without advance notice. PRINTED IN CHINA 811-208891-010 - E19 - 2088_eng3.