Important Safety Instructions The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. WARNING The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner manual.
Important Safety Instructions 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5.
Table of Contents Repeat Playback ........................................ 22 Important Safety Instruction ..................... 1-2 Disc Formats ................................................ 4 Before You Start ........................................... 5 Repeating a title/chapter (DVD) ............................ 22 Repeating a single track/whole disc (CD) ........... 22 Repeating a specific section (DVD) ...................... 22 Using the remote control ..........................................
Disc Formats The Unit can playback. DVDs [8cm(3")/12cm(5”) disc] Compatible Audio CD-Gs [12cm(5”) disc] Audio CDs [8cm(3")/12cm(5”) disc] GRAPHICS Region Management Information Region Management Information: This Unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond to the Region number of this Unit, this Unit cannot play that disc. The region number of this Unit is 1.
Before You Start Using the Remote Control • Point the Remote Control at the REMOTE SENSOR located on the Unit. • When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be degraded, causing unreliable operation. • The recommended effective distance for remote operation is about 16 feet (5 meters). To install Batteries 1.Open the battery door. 2.Insert two "AA" or UM-3 size batteries.
Parts and Functions Remote Control STANDBY/ON MUTE RETURN FUNCTION 1 2 GOTO 3 4 5 MEMORY KARAOKE MIC EFFECT VOCAL CANCEL KEY KEY 6 SETUP MENU 7 8 ENTER SLOW 9 10 11 STOP PREV 12 13 14 15 16 SLOW PLAY PAUSE SEARCH NEXT CLEAR DISPLAY ZOOM AUDIO ANGLE SUBTITLE A-B DISC REPEAT 1) STANDBY / ON button Turns the Unit on and puts it in standby mode. 2) RETURN button Return to the normal operation after using the SETUP menu.
Parts and Functions Remote Control STANDBY/ON 17 17) FUNCTION button 18 Display the FUNCTION screen where you can check or change various setting. 18) MUTE button To mute the sound. 19) GOTO button MUTE RETURN FUNCTION GOTO 19 Skip directly to a specific location on a DVD disc. 20) VOCAL CANCEL button Change the Vocal mode. 21) MIC EFFECT button MEMORY KARAOKE MIC EFFECT VOCAL CANCEL 20 21 Change the voice effect.
Parts and Functions Front Panel 4 5 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) Remote Sensor Receive the remote control unit signals. Display window Display system information. AV IN / TAPE / KARAOKE indicators When AV IN / TAPE / KARAOKE is selected, the light will illuminate. Cassette Door Open or close door by pressing the STOP/EJECT button. Place a tape inside the door. Cassette key buttons REC button : Recording the sound from Karaoke / DVD / CDG. PLAY button : Press to start the tape.
Parts and Fucntions Top Panel 25 26 OPEN 25) Handle 26) Disc tray 27 27) OPEN button Use to open the disc tray. Open the tray by pressing OPEN button. Place a disc on the disc tray, label side up.
Display Display Information The DVD displays the information shown below on the TV screen and on the Unit's DVD display depending on the operation status. Display Examples TV Screen If no disc is loaded when the Main Unit is switched on. No Disc Remarks " " appears when the tray is closed and: 1)There is no disc in the tray. 2)The disc type is not playable in this Unit. 3)The disc is not loaded correctly (upside-down, etc.) Tray open Close Tray closed Loading...
Setup A. Connecting a TV The Unit can be connected to your TV in several different ways, depending on the design of your TV. RCA Audio/Video cable Use the Audio/Video cable (supplied). Connect the VIDEO OUT and left/right AUDIO OUT jacks on the unit to the VIDEO IN and left right AUDIO IN jacks on your TV. or S-Video cable Use an S-Video cable (not supplied) and the Audio cable (not supplied). 1. Use an S-Video cable to connect the S-VIDEO (DVD) jack on your Unit to the S-VIDEO IN jack on your TV. 2.
Setup B. Connecting a VCR 1. Using the supplied Audio/Video cable, connect the yellow plug from VIDEO OUT jack on your Unit to VIDEO IN jack on your TV, connect the left/right AUDIO OUT jacks on your Unit to left/right AUDIO IN jacks on your TV. If you want the sound come from the speakers of the Main Unit, you need not to connect the left/right AUDIO OUT jacks from the Main Unit to your TV. 2. Using the Video cable (not supplied), connect the VIDEO IN (VCR) jack on your Unit to VIDEO OUT jack on your VCR.
Setup or Coaxial Antenna Jack Some TVs do not have an RCA or S-Video jack, they only have a coaxial antenna jack. In order to connect this Unit to these TVs, you must purchase an RF modulator (available in the Audio/Video department of most electronics retailers or at http://www.18002526123.com) and follow the instructions included with it. Notes : • Connect the Unit to your TV directly. If you connect the Unit through a VCR, the playback picture will be distorted because DVD discs are copy protected.
DVD CD CDG Basic playback Playing a Disc This owner’s manual explains the basic instructions of this DVD Unit. Some DVD discs are produced in a manner that allows specific or limited operation during playback. As such, the DVD Unit may not respond to all operating commands. This is not a defect in the DVD Unit. Refer to the instruction notes of discs. ” may appear on the TV screen during operation. A “ “ operation is not permitted by the DVD Unit or the disc.
Playing / Recording a Tape Playing a Tape 1. Press the STOP/EJECT button and load a cassette into the cassette compartment. 2. Press the PLAY Y button to begin playback. Pausing playback Press the STOP/EJECT button. To interrupt playback Press the PAUSE button. To resume play, press the PAUSE button again. To fast wind Press the REW (Rewind) button. or F.FWD (fast forward) button. Press the STOP/EJECT button to stop winding at the desired position.
Playing a Disc Fast Forward/Fast Reverse DVD CD SEARCH button on the remote control when a disc is 1. Press playing. • The disc begins fast scan at x2 speed. • Four speeds are available [for the SEARCH button on remote control only]. Each time SEARCH button is pressed, the speed of fast scan changes in the following sequence: 2. Press the PLAY Y button when you reach the desired point to resume playback at normal speed. Slow-motion play DVD or SLOW W button in the play mode.. 1.
Playing a Disc DVD Angle selection Some DVDs contain scenes which have been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are playing a DVD with different angles recorded, press the ANGLE button to view the number of the current angle. 2. Press the ANGLE button repeatedly to change the scene to the next angle in those recorded. • About two seconds later, playback continues from the new angle you selected.
DVD Special Functions Basic playback DISPLAY function Using DISPLAY, you can check and change the current settings of the following items: ANGLE, AUDIO and SUBTITLE. • While the disc is playing, press the DISPLAY button to display the screen shown below. Elapsed time: Elapsed time from the beginning of the chapter which is currently playing. Remaining time: Remaining time of the title which is currently playing.
Special Functions Basic playback Locating a specific title DVD If a DVD disc contains title numbers, you can locate a specific title by directly selecting a title number. 1. In stop mode, press the GOTO button. ou 2. Press , or button to highlight a specific field and press the corresponding number button(s) for the title you want. 3. Press the ENTER button to confirm. The Unit will start playback about 3 seconds later. Note : • Pressing the CLEAR button resets the title number.
Special Functions Basic playback Locating a specific time DVD CD You can move to a specific location by entering its corresponding time (hours, minutes, seconds) 1. Press the GOTO button. 2. Press or button to highlight time.. DVD CD 3. Press the corresponding number buttons for the setting point you want. • The first two numbers you entered represent hours. • The second two numbers you entered represent minutes. • The third two numbers you entered represent seconds. 4.
Advanced playback CD / DVD programmable memory DVD Programmable memory The two types of programmed playback provided by this Unit are title programmed playback and chapter programmed playback. Title / Chapter programmed playback 1. Press the MEMORY button while the disc is stopped. 2. Enter the title numbers in in -- -- . Use . or button to move the highlight to chapter and enter the chapter numbers Title Chapter 3. Use , , or button to move to the other field. 4. Repeat steps 2 to 3. 5.
Advanced playback Repeat Playback You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat) Repeating a chapter DVD You can play the same chapter repeatedly. 1. While the disc is playing, press the REPEAT DISC button until the “ Repeat Chapter ” indicator displays on the screen. The current chapter is played repeatedly. Repeating a title You can play the same title repeatedly. 2.
Playing MP3 and Picture File Disc This Unit will play MP3 and Picture files recorded on CD-R discs. Playing a MP3 file disc 1. 2. 3. 4. Press OPEN button on the top, the disc tray opens. Insert a MP3 file disc on the disc tray with the label side up. Press the disc tray's lid to close. The Unit will take a short while to load the disc and automatically begin playback. To pause playback • Press the PAUSE button. To resume playback again, press the PLAY Y button.
Playing MP3 and Picture File Disc Playing a Picture file disc 1. 2. 3. 4. Press the OPEN button, the disc lid opens. Insert a Picture CD on the disc tray with the label side up. Press the disc lid to close. The unit will take a short while to load the disc and automatically begin playback. Full-Screen Review Thumbnail Review Notes: • If you press the MENU button on the remote control, or press the STOP button in full-screen review, the Unit will display a menu of 12 thumbnail images.
Customizing the Function Settings LANGUAGE setting 1. Press the FUNCTION button until DVD appears on the display. 2. Press the STOP button so that no disc is playing. 3. Press the SETUP button. 4. Use or button to select the Language, then press the ENTER button. or button to English, then press the ENTER button. The screen will change to English Wordings 5. Use immediately. 6. To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button. VIDEO setting TV Shape 1.
Customizing the Function Settings Cut off when a wide-screen video image is played. 4:3 Pan Scan • When wide-screen video material is played, this mode clips the right and left sides of the image so that it can be viewed on a conventional TV screen. • Some wide-screen DVDs that do not permit Pan Scan mode playback are automatically played in letterbox mode (black bands top and bottom).
Customizing the Function Settings Brightness 1. Press the SETUP button. 2. Use or button to select Video, then press the ENTER button. 3. Use or button to select Brightness, and then press the ENTER button. 4. Use or button to shift and select the Off/On, then press the ENTER button. 5. If you want to exit the SETUP MENU and return to the normal screen, press the RETURN button.
Customizing the Function Settings AUDIO setting Digital Out 1. Press the SETUP button. 2. Use or button to select Audio, press the ENTER button. 3. Use or button to select Digital Out, and then press the ENTER button repeatedly to select Digital Out type. 4. To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button. Raw : Does not have a Dolby Digital Decode. PCM : Do have a Dolby Digital Decode.
Customizing the Function Settings RATING setting Password/Parental lock DVD discs equipped with the password function are rated according to their content. The contents allowed by a parental lock level and the way a DVD disc can be controlled may vary from disc to disc. For example, if the disc allowed, you could edit out violent scenes unsuitable for children and replace them with more suitable scenes, or you could lock out playback of the disc altogether. 1. Press the SETUP button. 2.
Customizing the Function Settings Factory Set If you want to return the initial language setting to the factory default, do the following: 1. Press the SETUP button. 2. Use or button to select the Rating, then press the ENTER button. 3. Use or button to shift and select the Factory Set, then press the ENTER button. 4. Use or button to shift and select Yes, then press the ENTER button. 5. To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
Language Code List for Disc Language Code Language Name Code Language Name Code Language Name Code Language Name AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DE DZ EL EN EO ES ET EU FA FI FJ FO FR Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byerlorussian Bulgarian Bihari Bislama Bengali Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French FY GA GB GL
Maintenance Cleaning Disc A defective or soiled disc inserted into the Unit can cause sound to drop out during playback. Handle the disc by holding its inner and outer edges. • Do NOT touch the surface of the unlabeled side of the disc. • Do NOT stick paper or tape on the surface. • Do NOT expose the disc to direct sunlight or excessive heat. • Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth. • NEVER use solvents such as benzine or alcohol to clean the disc.
Trouble Shooting Guide SYMPTOM No sound or only a very low-level sound is heard. CAUSE (AND REMEDY) • Check that the equipment are connected securely. • Make sure that you've selected the correct equipment on the system. • The system is in pause mode or in Slow-motion Play mode. Press the to normal play mode. • Fast forward or fast reverse is performed. Press the mode. PLAY button to return PLAY button to return to normal play • Make sure that AUDIO output and AV IN input connections are correct.