VENTURER with PLT37260 26" LCD TV uilt-ln Home Theater INSTRUCTION O | G i T A L MANUAL o,o, ...... ,o H:"lmltM Need More Help? DO NOT RETURN THIS PRODUCT TO THE STORE Please visit online help at http://www.1800customersupport.
PLACEMENT INFORMATION CAUTION * Do not use this unit in places that are extremely hot, cold, dusty or humid. * Do not restrict the airflow of this unit by placing it somewhere with poor air flow, by covering it with a cloth, by placing it on bedding or carpeting. DO NOT EXPOSETHIS UNITTO RAIN OR MOISTURE AViS_ISQUE DECHQC [LECTRIQLIE=NE PAS0UVRIR SAFETY IN FORMATION WARNING : TO REDUCE THE RISK OF ELECTRIC * When connecting or disconnecting the AC power cord, grip the plug and not the cord itself.
1) Read these instructions. 2) Keep these instructions. 3) 4) 5) Heed all warnings. Follow all instructions. Do not use this apparatus 6) 7) Clean only with a dry cloth. Do not block any ventilation Install in accordance manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers) that produce heat. plugs, convenience receptacles, and the point where they exit from the apparatus.
SAFETY PRECAUTIONS iMPORTANT ................................ SAFETY I PLAYING iNSTRUCTIONS A DISC ..................................... 23=24 Playing a Disc ............................................. 23 ............................................................................. 2 Playing a Picture File Disc .......................... 23 MAINTENANCE 2 Pausing Playback (Still Mode) .................... 23 3 Stopping Playback .......................................
NOTES ON COPYRIGHT iCONS USED ON DVDs It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public or rent copyrighted material without permission. Apparatus Claims of U.S. Patent Nos. 4,907,093; 5,315,448 and 6,516,132 licensed for limited viewing uses only. DVDs are copy protected, and any recordings made from these discs will be distorted. This product incorporates copyright protection technology that is protected by method claims of certain U.S.
Please check and identify the supplied accessories. [] Remote Control (with batteries) ................................................................................................. x1 USING THE REMOTE CONTROL • Point the remote controt at the remote sensor located on the unit. • When there is a strong ambient light source, the performance of the infrared remote sensor may be degraded, causing unreliable operation.
REMOTE CONTROL 6. 1-- VOLUME Press 7. 2-3 -- (-/+) buttons to adjust CURSOR the volume Press to highlight screen and adjust ENTER button selections on a menu certain settings. Press selections to confirm 8. screen. 44 / _-_,buttons 9. _ : Fast reverse playback. _-_-: Fast forward playback. PREV _._button Press to select previous on a disc. I O.SUBTITLE button Press to select 11-12_ Press to switch one the camera Press to show 13. GOTO button 14.
REMOTE CONTROL II PAUSE 17 Press frame 23. AUDIO i!ii=ii_iiiiiij i__ _i!?_i/i _¸_ _ _,i_ _ • _iii_ Press -- button to pause advance. playback and button to select audio soundtracks DVD or change the output 24. uP,SLOW button 18 Press to perform of a DVD. 19 single slow mode forward on a of a CD. playback 25. DVD MENU button 20 Press to enter the main menu 26. SETUP button Enter and exit the SETUP of the DVD. menu of the DVD. 27.
FRONT & SIDE VIEWS 17 1 ' mm 3 16 15 14 13 7 1. STD.BY/ON Turns 2. button the on-screen / HDMI2 / PC in. Opens the 13. DVD door on Adjusts the volume 6. 7. Left speaker Removable stand 8. _ PLAYbutton 9. Starts and resumes []STOP button the TV menu level. Receives playback playback and of a disc. single frame 11. _, PREV button back to previous chapters to advance chapters playback. disc door. the remote Standby indicator 17. Color LCD screen advance.
REAR ViEW 26 18 19 2O 27 21 29 22 30 23 31 18. VIDEO OUT jack (AV OUT) AUDIO OUT (Left / Right) jacks (AM OUT) 19. MONITOR /VGA jack (PC iN) 20. AC Power Cord 21. HDMI IN jacks (HDMI IN 1 / HDMiIN 2) 22. AUDIO jack (PC IN) 23. COMPONENT VIDEO IN (Y / PB / PR) jacks (YUV iN) 24.AUDIO IN (Left/Right) jacks (AV IN 2) 25. VIDEO iN jack (AV IN 2} 26. VIDEO iN jack (AM IN 1) 27. PHONES jack 28. TV ANTENNA terminal 29. AUDIO iN (Left / Right) jacks (AM iN 1) 30. S-VIDEO jack (AM IN 1) 31.
CONNECTING ATV ANTENNA / CABLE / SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor - A cable system - A satellite system Connecting Antenna aerial antenna a Digital The tuner in this TV receives ATSC TV signals from an antenna• Satellite, cable or TV antenna cable to TV ANTENNA terminal (cable not included) This digital TV can receive standard (SDTV) and high definition (HDTV) over the air broadcasts• Connecting an Anal
CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO OUTPUT To connect A/V devices Connecting such as a VCR, video game system or camcorder: to a VCR / Video Game System / Camcorder Connect the AUDIO / VIDEO cable (not included) as shown: Make sure you connect the cable from the other equipment (AUDIO I (AUDIO and VIDEO IN) orAV IN 2 (AUDIO and VIDEO IN).
CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the component video cable and audio cable (not included) as shown. Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV IN). f .osou.
CONNECTING HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes and other didital AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as welt as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant or HDMI-compliant displays.
CONNECTING THE AC POWER CORD * Connect the AC power cord into a wall outlet. . Press the STANDBY/ON button on the teft side of the unit or use the remote control to turn on the unit. NOTES • TO PREVENT ELECTRIC SHOCK, MATCH WiDE BLADE OF PLUG TO WiDE SLOT OF WALL OUTLET, THEN FULLY iNSERT, • When the AC power cord is plugged in, the unit is not completely disconnected from the main power, even when the power is turned off.
REMOVING THE BASE STAND WARNING: The LCD display is very fragile, and must be >rotected at all times when removing the base stand. Be sure that no hard or sharp objects, or anything that could scratch or damage the LCD display, come in contact with it. Do NOT place pressure on the rear of the unit at anytime because the screen could crack. 1. Disconnect any cables or cords connected to the unit. ii 2.
TURNING THE UNIT ON When the AC power cord is connected, press the STANDBY/ON button to turn it on. Press the FUNCTION button to select desired mode (TV/AM1 /AV2 / YUV in / DVD / HDMI1 / HDMI2 / PC in), If you select DVD, the DVD logo will appear on the screen. NOTE When the unit is not going to be used for a tong time, disconnect the AC power cord from the wall outlet. DOLBY DIGITAL (FOR DVD) Dolby Digital is a sound system developed by Dolby Laboratories Inc.
VIDEO MENU I. Press the MENU button. 2. Press the ENTER or I_ button to select Video. 3. Use the • or • button to select the options (Picture Tint, Sharpness or Color Temperature). Adjust them change to your desired setting); or press the ENTER or 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6.
AUDIO MENU 1. Press the MENU button. 2. Use the • or • button to select Audio, then press the ENTER or I_ button to go into the Audio settings. 3. Use the • or • button to select the options (Balance, Bass, Treble, Woofer, Virtual Surround, Reverb, or Sound mode). Adjust them using the _1 or • button (The screen wilt change to your desired setting); or press the ENTER or • button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5.
TV MENU (For TV Mode Only) 1. Press the MENU button. 2. Use the • or • button to select TV. Press the ENTER or• button to go into the TV settings. 3. Use the • or • button to select the options (Tuner Mode, Auto Scan, Auto Scan Add OH, Channel Skip, MTS or Audio Language). Adjust them using the • or • button (The screen wilt change to your desired setting); or press the ENTER or I,- button to go into the detailed settings. 4. Press the EXiT button to return to the previous menu. 5.
SETUP MENU I. Press the MENU button. 2. Use the • or • button to select Setup. Press the ENTER or • button to go into the Setup settings. 3. Use the • or • button to select the options (OSD Language, Time Setup, Caption or Restore setting). Adjust them using the • or • button (The screen will change to your desired setting); or press the ENTER or • button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6.
Caption Analog Digital Digital Setting Closed Caption Closed Caption Caption Style NOTE This function Restore Select the analog closed caption or turn it off. Select the digital closed caption or turn it off. Select as Broadcaster to use the default digital caption style of the broadcaster. Select Custom to activate the caption style items and set your prefered detailed settings. only works on ATSC programs broadcast with captions.
Parental Control Setting I. Use the • or • button to select various Parental settings. Press the ENTER or • button to go into the detailed settings. 2. Use the A •, 4 and • buttons to move among the rating levels. Press the ENTER button to change the mode between Blocked and Allowed. 3. Press the EXIT button to return to the previous menu. 4. Repeat steps 1 - 3 to adjust other options. 5. To exit the MAIN MENU and return to the normal screen, press the EXiT button repeatedly. Rating Enable Open V-Chip U.
This owneCs manual explains the basic instructions of this unit. Some DVDs are produced with limited operation during playback. For example, many DVDs do not allow users to skip government warnings, or in some cases previews or other features. This is not a defect in the unit. Refer to the instruction notes of discs. "_3" may appear on the screen during operation. A "[]" means that the desired operation is not permitted by the unit or disc. PLAYING A DISC 1.
FAST FORWARD / FAST REVERSE I. Press the SEARCH 4.q or _-_-SEARCH button when a disc is playing. * The disc begins a fast scan at two times normal (x2) speed. * Four speeds are available. Each time the SEARCH button is pressed, the speed of the fast scan changes. 2. Press the _,- PLAY button when you have reached the desired point to resume playback at normal speed. SLOW-MOTION PLAY (DVD) I. Pressthe |_,-SLOW buttonon the remote control inthe play mode.Two speeds are available.
DISPLAY While the disc is ptaying, status. press the DISPLAY Title i button repeatedly Cha_ter Audio I Cha_ter Titlel Cha_3ter information on operation Elapsed! time Subtitle I Titlel to display Angle I Remaining time Total| time LOCATING A SPECIFIC TITLE (DVD) If a DVD contains title numbers, you can tocate a specific title by directly selecting its title number. I. In STOP mode, press the GOTO button. 2.
You can play a specific title or chapter repeatedly. Repeating (Title repeat, chapter repeat, A-B repeat) a Chapter (DVD) You can play the same chapter repeatedly. I. While the disc is playing, press the REPEAT DISC button until the _':!_:_ screen. The current chapter is played repeatedly. Repeating indicator displays on the DISC button until the indicator displays on the DISC button until the _:;'_l_ indicator displays on the a Title You can play the same title repeatedly. 2.
PROGRAMMABLE MEMORY The two types of programmed playback provided by this unit are title/chapter programmed playback and track programmed playback. Title / Chapter Programmed Playback (DVD) I. In STOP mode, press the MEMORY button. 2. Enter the title numbers in Ill. Use the • or I_ button to move the highlight to chapter and enter the chapter numbers in N. 3. Use the •, I_, • or • button to move to other fields. 4. Repeat steps 2 to 3. 5. Press the m,_PLAY button to start the programmed playback.
LANGUAGE SETUP 1. Press the SETUP button in STOP mode. 2. Use the • button to change the highlight cursor. Use the • or • button to select a language, then press the ENTER button The screen will change to your selected language immediately. 3. To exit the SETUP MENU and return to the normal screen, press the SETUP button. VIDEO SETUP I. Press the SETUP button in STOP mode. 2. Use the • button to select LANGUAGE SETUP, then press the • or • button repeatedly until VIDEO SETUP appears. 3.
SYMPTOM CAUSE (AND REMEDY) No power. , The remote does not function. Check that the AC power cord is connected. • The unit is not turned on. • Remove any obstacles between the remote and the unit. • Use the remote near the unit. • Point the remote at the remote sensor on the unit. DVD • Replace the batteries No sound or 0nlya very low-level sound is heard. in the remote with new ones. • Make sure that you select DVD mode. , The system is in pause mode.
Unit : INCH 26.3" A "L J k_ i ¥ 18.
