PLV76176 17” LCD TV INSTRUCTION MANUAL Need More Help? DO NOT RETURN THIS PRODUCT TO THE STORE Please visit online help at http://www.venturer.com E - 20 PLV76176S7_IB_UL_090723.
SAFETY PRECAUTIONS PLACEMENT INFORMATION • Do not use this unit in places which are extremely hot, cold, dusty or humid. • Do not restrict the air flow of this unit by placing it somewhere with poor air flow, by covering it with a cloth, by placing it on bedding or carpeting. SAFETY INFORMATION CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers) that produce heat.
QUICK INSTALLATION Before turning on your television set for the first time, be sure to place it on a solid stable surface. To avoid danger, do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear and be sure to leave sufficient gaps around the unit as shown. 2 3/8" 2 3/8" 7 7/8" 1. Connect a TV antenna or a CATV cable to the Antenna Terminal on rear of TV. 2. Connect the power cord. 3. Press the / ON button to turn on the unit. 4.
CONTENTS SAFETY PRECAUTIONS .................................................................................... 1 IMPORTANT SAFETY INSTRUCTIONS ............................................................. 2 QUICK INSTALLATION ...................................................................................... 3 CONTENTS ......................................................................................................... 4 ACCESSORIES ..................................................................
ACCESSORIES Please check and identify the supplied accessories. Remote Control (with batteries) ............................................................................................ x 1 GETTING STARTED USING THE REMOTE CONTROL BATTERY REPLACEMENT TO INSTALL BATTERIES CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • Point the remote control at the remote sensor located on the unit.
CONTROL REFERENCE GUIDE REMOTE CONTROL 1) MUTE Button Press to turn off the sound. 2) MENU Button Press to display the on-screen menu or switch back to the previous menu screen. 3) CURSOR ( , , , ) Buttons Use to highlight selections on a menu screen and adjust certain settings. ENTER Button Confirm selection on a menu screen. 4) DISPLAY Button Press to display information on the current channel. 5) VOL + / VOL - Button Press to increase/decrease the volume.
CONTROL REFERENCE GUIDE FRONT & SIDE VIEWS 7 1 2 8 3 4 5 9 6 10 11 12 13 14 1. AUDIO IN (Left/Right) / VIDEO IN jacks 2. / ON button Turns the unit on and off. 3. MENU button Enters the on-screen TV menu. 4. FUNCTION button Selects TV / AV / PC. 5. CH / CH buttons Press to confirm selections on the TV menu screen and / to change TV channels. 6. VOL + / VOL - controls Adjusts the volume level and highlights selections (Left & Right) on the TV menu screen. 7. Color LCD screen 8. Built-in speakers 9.
CONNECTIONS CONNECTING A TV ANTENNA To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system To Home Antenna terminal Cable without a CATV converter or cable box TV ANTENNA Combination VHF / UHF antenna (ATSC / NTSC signal) To TV Antenna terminal Separate VHF or UHF antenna (ATSC / NTSC signal) NOTE For optimal reception of over-the-air TV broadcasts, we recommend that you use an ext
CONNECTIONS connect the Power cord • Connect the AC power cord into a wall outlet. • Press the / I button on the unit or remote control to turn on the unit. NOTE • Be sure the AC power cord is disconnected and all functions are off before making connections. • Make sure that all the components are connected correctly. • To prevent electrical shock, match wide blade of plug to wide slot of wall outlet, then fully insert.
USING HEADPHONES / EARPHONES • Turn down the volume before connecting headphones / earphones to the unit, then adjust the volume to your desired level. • When headphones / earphones are connected, no sound will come from the front speakers. NOTE Excessive sound pressure from earphones / headphones can cause hearing loss. E - 10 PLV76176S7_IB_UL_090723.
INSTALLATION INSTALLING / REMOVING THE BASE STAND WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. Do NOT exert pressure on the front of the unit at any time because the screen could crack. 1. Disconnect all cables or cords connected to the unit. 2. Lay the unit down on a flat surface with the back side facing up.
TV SETUP Note: Some setting items on the menu screen may not activate depending on what mode the unit is currently in (TV, AV and PC). PICTURE MENU 1. Press the MENU button. 2. Use the or button to select the options (Picture Mode, Contrast, Brightness, Color, Tint, Sharpness, or Color Mode). Adjust them using the or button (Screen will change to your desired setting). 3. Repeat step 3 to adjust other options. 4. To exit the MAIN MENU and return to the normal screen, press the MENU button repeatedly.
TV SETUP TIME MENU 1. Press the MENU button. 2. Use the or button to select time, then press the button to enter the time settings. 3. Use the or button to select the options (Sleep Timer, Time Zone, Daylight Saving Time or Clock). Adjust them using the or button. 4. Repeat step 3 to adjust other options. 5. To exit the MAIN MENU and return to the normal screen, press the MENU button repeatedly.
TV SETUP PC Setup (in PC mode only) - Resolution : 1,440 x 900 Refresh Frequency : 60Hz H - Pos V - Pos Clock Phase Auto Adjust : Center the image by moving it left or right. : Center the image by moving it up or down. : Adjusts the display clock to change width of the image. : Adjusts the image if there is flicker of screen letters, color misalignment, or blurring. : Adjust the image automatically.
TV SETUP Parental 1. Use the or button to select various Parental settings. Adjust them using the or button, or press the button to go into the detailed settings. 2. Press the MENU button to return to the previous menu. 3. Repeat steps 1 - 2 to adjust other options. 4. To exit the MAIN MENU and return to the normal screen, press the MENU button repeatedly. Picture Audio Time System Lock US Canada RRT Setting Reset RRT U.S. TV Ratings U.S.
TV SETUP TV MENU (For TV Mode Only) 1. Press the MENU button. 2. Use the or button to select TV, then press the button to enter the TV settings. 3. Use the or button to select the options (Antenna, Auto Scan, Auto Scan Add CH, Channel Skip, Channel No., Channel Label or DTV Signal). Adjust them using the or button, or press the button to go into the detailed settings. 4. Press the MENU button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6.
TROUBLESHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) No power. • Ensure the AC power cord is connected. • The unit is not turned on. The remote does not function. • • • • TV Bad Picture (snow, multiple images, distortion, blurry) Remove any obstacles between the remote and the unit. Use the remote near the unit. Point the remote at the remote sensor on the unit. Replace the batteries in the remote with new ones. • Check the location of the antenna and adjust it if necessary.
LIMITED WARRANTY VENTURER ELECTRONICS (“VENTURER”) makes the following limited warranty. This limited warranty extend to the original consumer purchaser and is limited to non-commercial use of the product. Ninety (90) Day Parts & Labor Warranty VENTURER products purchased in the United States are warranted to be free from defects in materials or workmanship for a period of ninety (90) days from the date of their original retail purchase.
UNIT INCH 3 5/8 16 3/4 14 5 6 7/8 9 3/4 7 10 Printed in China 811-761791W010 E - 19 PLV76176S7_IB_UL_090723.