User manual

Page 15 of 65
3.3 Camera Configuration
1. Click the Setup button at the top of the main page to access the configuration pages.
Camera Information
The following settings are found on the Camera Information page:
Setting Description Valid Entries Default
Camera Name
A name you assign to the camera
to help identify it. The name is
displayed on the main page.
Up to 12 ASCII characters None
Location
Enter the camera location such as
front door, stock room, etc.
Up to 18 ASCII characters None
Disable Power
Status Light
Disables (turns off) the
power/status indicator light.
Enable/Disable Enabled
Note: You must be logged in as an administrator to access the camera setup pages.