User manual

Page 28 of 65
Click the speaker button to enable
or disable audio streaming.
Audio Controls
Enabled Disabled
Settings
Only admin level user may access camera settings. The Settings button is not present when logged in as a
non-admin user. Click the Settings button to open the settings window.
Max. Frame Rate Sets the maximum frame rate that the camera can output.
Streaming Size Sets the resolution (size) of the image output by the camera. Reducing the streaming
size will significantly improve video performance (frame rate) when bandwidth is limited.
Lighting Conditions Improves video performance by configuring the camera for the appropriate lighting
conditions present in the camera view (scene). Use Backlight when the light source is
located behind the object you are trying to monitor. Use Night for very low lighting
conditions and Normal for all other situations.
Overlay If your PC’s video graphics adapter supports hardware overlay, you can enable overlay
for improved video performance.
Use Defaults Restore all default settings.
OK Save changes and exit.
Cancel Discard changes and exit.
Snapshot
Click the Snapshot button to capture the current image and save it to your PC. You’ll see a preview
of the image. Click Cancel to discard the image and return to the live view. Click Save to
save the image to your hard drive.
Note: Enabling audio will affect video
performance in low bandwidth (Internet)
conditions. When not using audio, be sure
to leave it turned off for best video
performance.
Note: Actual frame rate will depend on the bandwidth (speed) of your connection.
Note: The camera cannot operate in total darkness. The minimum illumination is 1 lux, equivalent to
a very dimly lit room. Also, the camera should not be aimed into direct sunlight. Prolonged exposure
to direct sunlight will damage the sensor and will void your warranty.
Audio Level Slider:
Move the slider
up to increase the audio input level.