Operating instructions

Charged Aerosol Detectors
Corona Veo and Corona Veo RS
Operating Instructions Page 123
10 Accessories, Consumables, and Spare Parts
Accessories, spare parts, and consumables for the detector are always maintained at the
latest technical standard. Therefore, part numbers are subject to alteration. However,
updated parts will always be compatible with the parts they replace.
For more information about accessories, consumables and spare parts, contact the Thermo
Fisher Scientific sales organization for Dionex HPLC products.
10.1 Standard Accessories
The following standard accessories are shipped with the detector. The part number always
refers to the packing unit. Unless otherwise stated, the packing unit is 1 unit.
10.1.1 Corona Veo
Description Part no. Quantity in
the
accessories
kit
Accessories for the Corona Veo detector
Fuses Kit
(2 fuses, 1A, slow-blow, 5 x 20 mm)
70-6666 1
Parts for connecting the detector drain:
Tee piece for drainage system
L piece for drainage system
Flexible hose (11.4 mm O.D. x 8.4 mm I.D.)
Included in
Included in
Included in
6040.0005
6040.0005
6040.0005
2
4
2 m
Tool kit, including:
1 multi-tool
1 offset screwdriver Torx size TX10
1 offset screwdriver Torx size TX20
1 screwdriver (3/32" x 2")
1 hexagon socket wrench (1/2" x 9/16")
6081.9190 1
RheFlex fittings (PEEK, 1/16", finger-tight) Included in 6000.0012 4
Inch-to-metric adapter (1/4" O.D. to 6 mm O.D.) --- 1
Exhaust Hose Assembly, including
Gas exhaust hose (1/2" x 11/16" I.D. x O.D., L 2.5 m)
Fitting (1/2" x 3/8")
70-6261 1
Gas inlet tubing (1/8" x 1/4" I.D. x O.D., L 2.5 m) 6081.1070 1
In-line filter (SST) with filter frit included 70-4538 1
Filter frits (SST, porosity 0.5 µm) for replacement 70-4539 10
Tubing cutter 70-7112 1