Operating instructions

Charged Aerosol Detectors
Corona Veo and Corona Veo RS
Page 26 Operating Instructions
3.2 Unpacking the Detector
All electrical components of the detector are carefully tested before the module is shipped
from the factory. After unpacking the detector, inspect the module for any signs of
mechanical damage, which might have occurred during transit.
Tips: Immediately report any shipping damage to both, the incoming carrier and
Thermo Fisher Scientific. Shipping insurance will compensate for the damage
only if reported immediately.
Keep the original shipping container and packing material. They provide
excellent protection for the module in case of future transit. Shipping the
module in any other packaging automatically voids the product warranty.
1. Open the packaging box of the detector and remove the accessories kit and power
cord. Some accessories may be shipped in a separate box.
The scope of delivery comprises:
♦ Detector
♦ Accessories kit
♦ Nebulizer
♦ Power connection cable
♦ Operating Instructions
2. Grasp the detector by the sides. Slowly and carefully, pull the detector out of the
shipping container and place it on a stable surface.
Important: To prevent the detector from falling, grasp the detector by the
sides, and then lift the detector together with the foam spacers
out of the shipping container. Do not lift the module by the
foam spacers and not by the front panel doors.
Important: Afin d'empêcher l'instrument de tomber, saisissez-la par les
côtés. Ne soulevez l'instrument e à l’aide du matériau
d'emballage ou par les portes des panneaux avants.
3. Remove the foam spacers, and then remove the polythene packaging.
4. Before connecting the detector to the power source, allow the module to come to room
temperature and to allow any condensation that might have occurred during shipping
to evaporate.