Installation Manual

RECYCLEPAK® PACKAGING AND SHIPPING INSTRUCTIONS
THE INSTRUCTIONS MUST BE FOLLOWED FOR SAFE PACKING, STORAGE AND SHIPMENT OF THIS CONTAINER.
Additional Shipping Charges-
ship us items in the wrong RecyclePak® container, or ship us items in a container other than an approved RecyclePak®
container we may charge you an additional fee to compensate us and you agree to pay the additional fee(s).
Recommended Safety Supplies-
other types of lighting waste.
Customer Service- [phone] Monday – Friday- 8am to 5pm CST
LAMP RECYCLING BOXES
Authorized Contents- The RecyclePak® lamp boxes are designed for a variety of lamp types. Please follow the guidance
below as to the types of lamps allowed in RecyclePak® lamp boxes. Placing unauthorized materials inside any RecyclePak®
container will subject you to additional handling fees as well as violate our terms and conditions and eliminate any liability
protection offered under this program.
? Supply-043- Holds 30 T12 / 72 T8 4ft straight fluorescent lamps & u-tube lamps ONLY
? Supply-044- Holds 16 T12 / 39 T8 8ft straight fluorescent lamps ONLY
? Supply-065- Holds 68 T12 / 146 T8 4ft straight fluorescent lamps & u-tube lamps ONLY
? Supply-098- Holds 16 T12 / 39 T8 4ft straight fluorescent lamps ONLY
?Supply-126- Holds 22 T12 / 32 T8 u-tube lamps, misc. amounts of high intensity discharge lamps, up to 250 compact
fluorescent lamps
? Supply-190- Holds 25 T12 / 57 T8 8ft straight fluorescent lamps ONLY
?Supply-191- Holds 46 T12 / 81 T8 u-tube lamps, 60 400W HIDs
? Supply-192- Holds 150 small spiral compact fluorescent lamps, 525 2-pin compact fluorescent lamps, 265 4-pin compact
fluorescent lamps, incandescent
Step #1- Open and Complete Your Return Shipping Label
1. Open your FedEx Ground Label booklet adhered to the front of the box by removing the “remove to open” tab. (See Figure
1). Detach to expose label. Retain your proof of purchase included within the FedEx Ground Label booklet. (See Figure 2).
Since certain states require special handling (Alaska, Hawaii and Puerto Rico), a prepaid shipping label may not be
enclosed. Please contact customer service toll-free at [phone] to arrange for pickup if a label was not enclosed.
2. Write your mailing address in the “From” section on the FedEx Ground label (See Figure 3). Make sure to include your
company name, mailing address, city, state and zip code. A CERTIFICATE OF RECYCLING WILL NOT BE ISSUED IF THIS IS
NOT COMPLETELY FILLED OUT.
3. Complete the label by checking the type of material you will be placing in the container and entering an “ACCUMULATION
START DATE”. The “ACCUMULATION START DATE” is defined as the date when your first lamp was placed into the
RecyclePak® (See Figure 4).
4. Enter the “ACCUMULATION START DATE” also on the container under the “GENERATORS RESPONSIBILITIES” (See Figure
5).
5. Apply the appropriate color coded sticker to the FedEx Ground label as directed in your FedEx Ground Label booklet and
map. (See Figure 6). If you have questions, please call customer service toll-free at [phone]. SHIPPING TO
UNAUTHORIZED ZONES will subject you to additional handling charges.
Step #2- Prepare Package
1. Open container and seal bottom of box with 3” minimum clear plastic tape or equivalent. MAKE SURE CORNERS, EDGES,
FLAPS AND SEAMS ARE PROPERLY SEALED WITH TAPE (See Figure 7).
2. The RecyclePak® container MUST BE PROPERLY SEALED AND STRUCTURALLY SOUND. THE CONTAINER MUST LACK
EVIDENCE OF LEAKAGE OR DAMAGE THAT COULD CAUSE LEAKAGE. FedEx Ground may refuse packages that do not meet
the criteria!
3. Open brown corrugated tube and place inside the liner (See Figure 8). Place bagged tube into RecyclePak® (See Figure 9).
If you exceed the stated capacity of a RecyclePak® container, ship us non-approved contents,
Veolia recommends the use of gloves and safety glasses when handling fluorescent and
(Applies to Supply-043, Supply-044, Supply-065, Supply-098, Supply-126, Supply-190, Supply-191 and Supply-192)
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
PLACING THE BROWN CORRUGATED TUBE INSIDE THE LINER IS REQUIRED.
DO NOT PLACE THE LINER INSIDE THE RECYCLEPAK® WITHOUT FIRST
PLACING THE BROWN CORRUGATED TUBE INSIDE THE LINER. FAILURE TO
DO THIS WILL RESULT IN NON-COMPLIANT SHIPPING AND SUBJECT YOU TO
ADDITIONAL HANDLING FEES.
Figure 6
PROGRAM APPROVED FOR USE IN THE USA ONLY. NOT FOR EXPORT.
STOP
STOP